In stock


Shipping in 2-4 business days
Free Shipping over $99
Hassle Free Returns

Quick Specs

  • Size:Kit 3-1/8" & 2-1/16" (Kit 79.4mm & 52.4mm)
  • Type:Kits
  • Range:120 MPH/100 PSI/100-240 °F/8-18V/240ΩE-33ΩF
  • Lighting:Incandescent
  • Instructions: Download PDFDownload PDF


AutoMeter has brought together the most popular gauges into a simple kit. The kit includes a speedometer, water temperature, oil pressure, fuel level, and voltmeter. All senders included where applicable.
Feature Points
  • Traditional incandescent lighting illuminates around the perimeter of the dial
  • Kit includes fuel level sender (240E/33F), oil pressure sender, water temperature sender, bulb and socket assemblies, red and green bulb covers, mounting hardware, and detailed instructions for installation.
  • Speedometer features a traditional rolling drum odometer and a resetable tripmeter
  • Speedometer accepts a 5/8" x 18 thread speedometer cable and is calibrated for 60 MPH at 1,000 cable RPM
  • Domed Lens
Ships With
  • Includes Sending Unit: 3262
  • 1/8" NPT Male to 1/8" compression fitting, 1/8" NPT Female to 1/8" compression fitting, 1/8" NPT to 1/4" NPT bushing, 3/8" NPT and 1/2" NPT adapter fittings.
  • Brackets Included
California Residents: Prop 65 WARNING prop65 Cancer, Birth Defects and Reproductive Harm


  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 7.78ms
  • bvseo-msg: HTTP status code of 404 was returned;


Hi, will the fuel gauge in this kit work with my stock sender unit in my 1967 Chevy C10 ?

Asked by: Jaws
The fuel level gauge in this kit is designed to work with the included sender. The correct fuel level gauge for your truck is this 0-90 ohm model:
Answered by: Jim from AutoMeter
Date published: 2023-03-15

what's the difference between this kit and the 1300 kit ?

Asked by: Jaws
The 1300 Kit has electric water and oil gauges, while the 1311 has mechanical water and oil gauges.
Answered by: Jim from AutoMeter
Date published: 2023-03-14

Can I swap out gauges for other gauges in this set. I need two mechanical water temp gauges and mech oil pressure and mech speedo. I have a 6v positive ground system and volt meter and fuel gauge will not work

Asked by: Creekboat Joe
Thank you for your question. You would need to purchase the gauges individually.
Answered by: Natalia from AutoMeter
Date published: 2020-12-18

be nice to know measurements ..outside or in side of bezel ring by looks the speed o meter look bigger than 3 1/8

Asked by: sansui
Thank you for your question. The size listed is the diameter of the hole that particular gauge will fit in. The 3-1/8" Speedometer will fit in a 3-1/8" hole, it has an outside diameter of 3-5/16" across the face of the gauge. 2-1/16" gauges will fit in a 2-1/16" hole and have an outside diameter of 2-1/4".
Answered by: Zach from AutoMeter
Date published: 2019-06-20

Are these gauges programmable 

Asked by: Mata
Thank you so much for contacting us. The gauges in this kit are not programmable. The speedo, oil pressure and water temp are all traditional mechanical gauges. The voltmeter and fuel level are both electronic, but have fixed values (8-18v and 240-33 ohms). Hope this helps!
Answered by: Joseph At AutoMeter
Date published: 2018-08-01

Do y’all offer this kit with LED bulbs already installed?

Asked by: Bepeninger
  • y_2024, m_2, d_28, h_11CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_1311, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_autometer-us
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 7.17ms