You have no items in your shopping cart.
-
Chris Leso’s Factory Five 33 Hot Rod
Chris Leso has been into cars his whole life. When he was sixteen, he got a 1955 Chevy as a first car that he still owns to this day. He always had a dream of building an open-wheeled hot rod and it became a real possibility when he came across...Chris Leso has been into cars his whole life. When he was sixteen, he got a 1955 Chevy as a...
-
01
Sep
Chris Leso’s Factory Five 33 Hot Rod
Chris Leso has been into cars his whole life. When he was sixteen, he got a 1955 Chevy as a... -
31
Aug
August 2020 Racing Round Up
AutoMeter is proud to support racing across the country through contingency programs and other sponsorships. Here is a roundup of... -
25
Aug
Mike Norrbom's 1964 Pontiac GTO
Mike Norrbom grew up learning how to wrench on cars from his family. As the fourth generation family member to... -
19
Aug
2015 Ford Mustang 5.0 Coyote Water Temp and Oil Temp Install
Today, we are installing AutoMeter Spek-Pro water temp (Model #P346328) and oil temp (Model #P322328) gauges into a 2015 Ford... -
03
Aug
July 2020 Racing Round Up
Shane Cottle - USAC Racing Brady Bacon - Kokomo Speedway, USAC Racing Robert Ballou - Gas City Speedway, USAC Racing... -
28
Jul
Family Owned 1957 Chevy
In 1973, Jim’s father purchased this 1957 Chevy from the original owner with only 21,000 miles on it. The car... -
08
Jul
Jack Gilbert Jr.’s Chevy Van
Jack Gilbert Jr. and his 1965 Chevrolet Van go way back. In his words, “I have had it longer than... -
01
Jul
June 2020 Racing Round Up
AutoMeter is proud to support racing across the country through contingency programs and other sponsorships. Here is a roundup of... -
29
Jun
Universal InVision Digital Dash Now Available
The new InVision Direct Fit Digital Dash System (Model #7000) is a universal solution for your entire dash and is... -
18
Jun
New Extreme Environment Gauge Kit from AutoMeter
Your UTV, ATV, or off-road vehicle treks through thick mud, sandy dunes, and deep puddles. Ensure your gauges don’t let... -
16
Jun
Introducing the Fuel Bridge Interface from AutoMeter
The new Fuel Bridge from AutoMeter (Model #9109) allows you to easily install AutoMeter fuel level gauges in nearly any... -
05
May
Caballo Del Diablo Bronco Dominates at the NORRA Mexican 1000
The Caballo Del Diablo (or horse of the devil) is a 1968 Ford Bronco that has been turning heads and... -
01
May
Cash for Your Dash: Save up to $150
From now until June 30, 2020, you can save up to $150 off ALL AutoMeter products! This sale includes every AutoMeter product, including gauges, gauge... -
24
Apr
Josh Pena Restores 1964 Chevelle in Memory of Larry Pena
Throughout Josh’s childhood, his dad, Larry Pena, always had a classic car in the garage that he would be wrenching... -
16
Apr
1966 Chevelle SS from Fabbit Customs
In 2014, a retired Fire Chief from Charlotte, NC came to Fabbit Customs with his 1966 Chevelle SS. He had... -
03
Apr
Installing a Boost, Pyrometer and Transmission Temperature Gauge in a 2008 Ford 6.4 Powerstroke
So, you've got a 2008 Ford Super Duty 6.4 Diesel and you want to unleash some of that hidden performance... -
27
Mar
Installing a Triple Gauge Kit in a 1997-2007 Ford Powerstroke
Looking for more information on your 1997-2007 Ford 7.3 or 6.0 Powerstroke? This tech article supplements the instructions included with... -
19
Mar
Auto Gage 3 ¾” Pedestal Tachometers Now Available in 0-10,000 RPM
The new Auto Gage 3¾” Pedestal 0-10,000 RPM Tachometer with Shift Light provides great performance at a great value. Available... -
13
Mar
New Jeep JK Gauge Panel, JL CB Radio/Switch Panel and Tire Pressure Gauge
Jeep JK 3 Gauge Panel (Model #8200) The Jeep JK 3 Gauge Panel with Officially Licensed Jeep Gauges is built... -
02
Mar
InVision Digital Dash for 1973-1987 Chevy Trucks Now Available
The new InVision Direct Fit Digital Dash System (Model #7004) for square body 1973-1987 Chevy Trucks and Suburbans is a... -
26
Feb
Introducing the E-POWER 800 Power Pack: The Ultimate Handheld Jump Start Kit
AutoMeter is pleased to introduce the E-POWER 800 Emergency Power/Jump Starter. This versatile unit can jump start your car as... -
18
Feb
Eyes Like a Hauk: Kenny Hauk’s Attention to Detail
Kenny Hauk, the owner and founder of Hauk Offroad, grew up in Chambersburg, Pennsylvania watching his father build things on... -
06
Feb
Your GPS Speedometer Interface Module Questions Answered
The speedometer is likely one of the gauges you spend the most time looking at. Here is some helpful information... -
29
Jan
DashLink II - Display AutoMeter Gauges on Your Mobile Device
DashLink II allows you to display the accuracy and precision of AutoMeter gauges on your smartphone or tablet in real... -
21
Jan
Harry Gerb’s Forever First Car
Harry Gerb started building and showing model cars at a very young age. At sixteen, he knew it was time... -
08
Jan
The Jeepster Commando That Can Go Anywhere – and Does
Marvin Stammel grew up around Jeeps. His dad purchased a Jeep Wrangler right after he was born. By the time... -
30
Dec
Trust Me, My Wiring Is Fine: Wiring Tips and Tricks
Don’t tell me to check my ground, my wiring is fine! While the above picture is somewhat of a joke... -
17
Dec
Highlights of PRI 2019
Each year, the worldwide racing industry gathers in Indianapolis, Indiana to see the latest and greatest in racing technology at... -
10
Dec
Tinman II Kustom’s Tinmama
The build that would eventually become Luke Merrill’s Tinmama started as a project for his dad in 1990…two years before... -
03
Dec
Ford 4.6 & 5.4 Modular Motor Water Temperature and Oil Pressure Gauge Installation
Today, we are connecting Water Temperature and Oil Pressure gauges to a Ford 4.6L Modular Motor. These points will be... -
27
Nov
November Racing Round Up
AutoMeter is proud to support racing across the country through contingency programs and other sponsorships. Here is a roundup of... -
20
Nov
InVision Dash Awarded Best New Interior Accessory Product at SEMA
AutoMeter is proud to announce that the InVision Digital Dash won Best New Interior Accessory Product at the SEMA Show... -
20
Nov
Larsen Restoration and Design’s Mean Cuda
The Larsen family has always been into cars. After growing tired of their jobs, the decision came easy for Curtis... -
14
Nov
Highlights of SEMA 2019
The annual SEMA Show in Las Vegas, Nevada is a place like no other to see the latest products, trends... -
31
Oct
October Racing Round Up
AutoMeter is proud to support racing across the country through contingency programs and other sponsorships. Here is a roundup of... -
22
Oct
Home Built Diesel Hot Rod
Growing up, Jake Maier’s uncle and grandfather were always working on restorations in their garage. He felt like the coolest... -
16
Oct
Behind the Scenes at PCHRODS
In 2005, Rob Phillips was brought onto the set of Overhaulin' to complete a single wiring job. Little did he... -
15
Oct
Ultima Fecha del Street Racing League
Ultima Fecha del Street Racing League was the last race of the 2019 season for all eight categories of the... -
08
Oct
Meet the Fraziers: The 240Z Family
Mark Frazier was first introduced to racing through BMX. At seventeen, he decided to quit that to make more time... -
01
Oct
2000 Dodge 5.9 Cummins Fuel Pressure Gauge Installation
The 5.9 Cummins is a nearly indestructible engine with one Achilles heel - the fuel system. Having a fuel pressure... -
30
Sep
September Racing Round Up
AutoMeter is proud to support racing across the country through contingency programs and other sponsorships. Here is a roundup of... -
26
Sep
Samsung Recognizes AutoMeter Battery and Electrical System Testing Excellence
Click here to read the article. -
17
Sep
Michael Williams’ Chevy C10
Growing up, Michael Williams’ mom and stepdad owned a 1970 C20 camper edition. They would take him camping throughout his... -
11
Sep
Goodguys 33rd West Coast Nationals
The Goodguys 33rd Annual West Coast Nationals is the only of the four events in Pleasanton, California that is not... -
10
Sep
C10R: A Family Affair
In 2010, Rob Phillips met his future wife, Brandy, at a Goodguys Autocross event. Brandy had a long career in... -
09
Sep
2019 Labor Day Cruise in Southern California
Here's a highlight reel of the event: 1952 Willys owned by Stan F. 1956 Chevy Bel Air with Arctic White... -
04
Sep
Robert’s First Gen Ram with Twenty-Six Gauges
Robert was born into a Mopar family with his father having restored and owned many 1960’s Chrysler products. At fourteen... -
03
Sep
August Racing Round Up
AutoMeter is proud to support racing across the country through contingency programs and other sponsorships. Here is a roundup of... -
21
Aug
Ron and Emily’s Father Daughter Ford T-Bucket
Ron Bychowski wanted to own something different than everyone else. On June 17, 1990, he purchased his 1924 Ford T-Bucket... -
14
Aug
Chris’ 1983 Jeep J-10
Chris Overacker has been a Full Size Jeep (FSJ) enthusiast ever since seeing Roger Mears off-road racing in the Budweiser... -
07
Aug
Marc Vigna’s Cummins Swapped F250
Marc Vigna first became interested in trucks through his father’s 1978 Ford F250. Spending his childhood riding shotgun for a... -
31
Jul
July Racing Round Up
AutoMeter is proud to support racing across the country through contingency programs and other sponsorships. Here is a roundup of... -
30
Jul
Turning Back Time Car Show 2019
On Sunday, July 28, 2019, the Turning Back Time Car Show celebrated twenty years of bringing together a wide variety... -
23
Jul
Eibach All American Meet 2019
This year marked the first Eibach All American Meet car show focused entirely on domestic vehicles in Corona, California. -
19
Jul
Brother's Truck Show 2019
As one of the largest truck shows in the United States, the Brother’s Truck Show has expanded over the past... -
18
Jul
New Ford Truck Pillars Now Available
AutoMeter is proud to expand its successful line of Ford pillars with the addition of new Replacement Dual and Triple... -
17
Jul
Installing a Boost, EGT and Transmission Temp Gauge on a 2003 GM Duramax
AutoMeter’s Factory Match gauges are a great way to have more visibility on vital measurements without sacrificing the factory look... -
11
Jul
LS Derived Engine Gauge Installation
With more and more vehicles getting an engine of LS origins swapped in, we have put together a guide that... -
03
Jul
Behind the Scenes with Jeremy Lehrke
Jeremy Lehrke has been around racing since he was a child. His dad sold his show car to get a... -
01
Jul
June Racing Round Up
AutoMeter is proud to support racing across the country through contingency programs and other sponsorships. Here is a roundup of... -
27
Jun
2008 Dodge Cummins 6.7L Gauge Installation
Today, we are hooking up a Dodge Ram with a 6.7 Cummins with a boost (Part #7504), pyrometer (Part #7544... -
25
Jun
Tony Frank’s 1985 Mustang GT
In 1985, Tony Frank’s father worked as a machine repairman at the Ford Plant in Milan, Michigan. A family friend... -
18
Jun
Empty Nest, Full Throttle
Greg Thurmond started racing bicycles when he was twelve years old and then moved onto dirt bikes and ATV's in... -
14
Jun
How to Install an Oil Pressure, Axle Temperature, Voltmeter, and Dash Pod in a Jeep Wrangler JK
Keeping an eye on what’s going on throughout your Jeep is important in preventing issues, especially when offroading. In this... -
11
Jun
Goodguys Summer Get-Together
Great weather called for large crowds at the second Goodguys event at the Alameda County Fairgrounds in Pleasanton, California. This... -
07
Jun
Enter to be an AutoMeter Featured Car at the Turning Back Time Car Show
Will you be entering your car in the Turning Back Time Car Show on July 28 in Sycamore, Illinois? Enter... -
04
Jun
Route 66 NHRA Nationals
The Route 66 NHRA Nationals are in AutoMeter's backyard in Northern Illinois! With hundreds of cars racing and speeds over... -
30
May
May Racing Round Up
AutoMeter is proud to support racing across the country through contingency programs and other sponsorships. Here is a roundup of... -
29
May
Midnight Blue Monte Carlo
Terrance Hight’s first car was a 1986 Chevy Monte Carlo SS with a T-Top. He sold it in 2006 and... -
22
May
Short Sweep Electric Crash Course
A Short Sweep Electric (SSE) or Air-Core gauge is at its essence, a small magnetic core with copper windings around... -
20
May
1968 Ford Bronco – and Mini-Me!
Gabe Lopez wasn't looking to buy anything when he went to a Car Show & Swap Meet at the Pomona... -
15
May
Create Your Own Gauges in the AutoMeter Custom Shop
The first place someone's eyes fall when looking into your car is the gauges. The one piece of the interior you... -
13
May
Counting Down the Days Until the Turning Back Time Car Show
On Sunday, July 28, 2019, the Turning Back Time Car Show is celebrating twenty years of bringing together a wide... -
09
May
How to Install an Air Locker Pressure Gauge
Lockers are a big investment in your 4x4. Unlike open or limited slip differentials, a locking differential is designed to lock... -
06
May
Behind the Scenes with Lauren Butler from Edlin Motorsports
Racing has been a part of Lauren Butler’s life as far as long as she can remember. She grew up a... -
29
Apr
Get Featured by AutoMeter
Interested in having your car featured on our blog or social media channels? We would love to check out your... -
25
Apr
AutoMeter's Own Marc Erickson
Marc Erickson has been around drag racing his entire life. He was introduced to drag racing by his father, who... -
23
Apr
Soldering and Crimping
When wiring, you may find yourself asking when to solder and when to crimp. Soldering does cause the joint to... -
08
Apr
Down the Right Track with LASD Motorsports
LASD Motorsports is a program organized by Deputy Sheriffs from the Los Angeles County Sheriff’s Department that have a passion... -
02
Apr
Family of Falcons
Mark Sword Jr.’s grandfather founded the Falcon Club of America (FCA) in 1979. His member number was #1, his son... -
29
Mar
Vacuum/Boost Gauge or Boost Only Gauge?
Any gas engine will naturally produce measurable vacuum any time that it is running. This is the result of the... -
19
Mar
Introducing the New Race Dash with Water Pressure Channel
AutoMeter is pleased to introduce a new variation of our popular digital/analog racing displays with features that address the unique... -
07
Mar
Introducing Elite Digital Two Channel Gauges
AutoMeter is proud to introduce our new Elite Digital Two Channel Gauges. The Elite Digital gauges provide options to help... -
02
Mar
The Best Place to Ground Accessories
Despite common belief, the battery ground is NOT the best place to ground accessories. The battery ground to body/engine/chassis is...
