In stock


Shipping in 2-4 business days
Free Shipping over $99
Hassle Free Returns

Quick Specs


Includes 6ft. of #4 braided stainless steel line, firewall pass through grommet, 1/8" NPT female right angle to -4AN male fitting, -4AN male to 1/8" NPT male fitting, -4AN male to 1/8" NPT female fitting, 1/8" NPT to 1/4" NPT adapter bushing. Recommended for use with fuel pressure gauges. For use with mechanical pressure gauges and for remote mounting of electric gauge pressure senders.
Feature Points
  • 6ft hose length
  • PTFE lined hose, resistant to most fluids
  • Type 304 Stainless braid
  • Maximum Operating Pressure - 3000 PSI
  • Burst Pressure - 12,000 PSI
  • `-65 °F to 450 °F Operating Temperature Range
  • Includes 1/8"NPT male to -4AN female straight, 1/8" FPT Female to -4AN Male straight, 1/8" NPT Female to 1/4" NPT male straight, and -4AN to 1/8" NPT female 90 degree fittings
California Residents: Prop 65 WARNING prop65 Cancer, Birth Defects and Reproductive Harm


  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 55.72ms
  • bvseo-msg: HTTP status code of 404 was returned;


Will this work for 2612 guage in a diesel applixation undee 80 psi

Asked by: TrickyRicky
Yes, this will work with that unit.
Answered by: Steve from AutoMeter
Date published: 2023-12-07

Hello! In the picture for the line kit #3228. ALL i need is a PAIR of the fittings pictured lower right. the 1/8" pipe female to -4 male, 90 degree! Im working in side your mounting cups and cant find that fitting ANYWHERE but here. PLEASE HELP

Asked by: Gearhead 3271 is what you need.
Answered by: Jim from AutoMeter
Date published: 2022-08-26

Will this line work with the 3421 Mechanical oil pres. gauge. Is everything I need with this kit. I am installing it on a 1969 Olds 442. Jack

Asked by: Jack 69
Hi Jack, Yes, this kit will include everything you need to adapt to a 3421 and to your 1996 Olds. Barring any tight clearance issued on the engine that may require a 90 degree fitting. That would be rare though. Thank you, Matt
Answered by: Matt from AutoMeter
Date published: 2021-12-09

Will this kit fit the Product # 5421?

Asked by: Karsten
Thank you for your inquiry. This braided hose kit comes with correct adapters for use with the 5421 oil pressure gauge.
Answered by: Jim from AutoMeter
Date published: 2019-09-22

Need more good advice. Will the #3228 Braided -4AN line be a good upgrade for the #5921 ES full sweep mechanical oil pressure gauge ? The high temperature rating is needed and it would look great too. Thank you. 

Asked by: AnalogDan
Thank you for your question. Yes, that is what I would recommend. It will work just fine and is an excellent upgrade for your line.
Answered by: Zach from AutoMeter
Date published: 2019-01-10

Hello to the professionals at AutoMeter. Will this -4 AN Stainless line accessory support the vac/boost requirements of your excellent ES #5907, 2.06”dia, 30 in.hg/20 psi full sweep gauge ? The worlds best gauges deserve great accessories. Thank You. 

Asked by: AnalogDan
Thank you for your question. We would not recommend the -4AN line, we would recommend the smaller -3AN line for this application, which is our part #3236
Answered by: Zach from AutoMeter
Date published: 2018-12-04
  • y_2024, m_4, d_17, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_3228, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_autometer-us
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 52.72ms