In stock


Shipping in 2-4 business days
Free Shipping over $99
Hassle Free Returns

Quick Specs


1/8" NPT Female to M16x1.5 Male Commonly used for oil pressure sensor / line installation on GM LS engines when connecting to the port on the top of the block behind the intake manifold
Feature Points
  • Constructed from solid brass
California Residents: Prop 65 WARNING prop65 Cancer, Birth Defects and Reproductive Harm


  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 66.23ms
  • bvseo-msg: HTTP status code of 404 was returned;


hi, I need an adapter for 22r/22re 1986 toyota stock engine block oil pressure sender port.  The stock block female port is 1/8" x28 BSP.   Do you have this?

Asked by: Gulkana
Here you go:
Answered by: Jim from AutoMeter
Date published: 2023-09-11

Do you have a drawing of the adaptor? I need to know the height of the hexagonal nut. Thanks Andi

Asked by: AndiGuzzi
The overall length is .938 inches, the hex part is .5 inches of that.
Answered by: Matt from AutoMeter
Date published: 2022-02-01

do you have a dimensional drawing of the adaptor? I need to know the height (or length) of the hexagonal part (nut).

Asked by: AndiGuz
We have a drawing available, but you'd have to send us an email to request it. The overall length of the entire adapter is .938 and just the hex part is .5 inches of that overall length.
Answered by: Matt from AutoMeter
Date published: 2022-01-23

I need an adapter like this but with the opposite measurements female 1/8 to maleM16x1.5, do you have it in stock?

Asked by: sean kekoa
Thank you for your question. We do not offer something like this.
Answered by: Natalia from AutoMeter
Date published: 2021-03-04

Can this be used for water temp sensor?

Asked by: Jfr515
As long as the thread pitch is the same it will work fine. 
Answered by: Pete27
Date published: 2019-01-21

how much is the shipping #2268

Asked by: 1026lab
Any time I ordered a fitting, the shipping ends up being like 2 or 3 times as much as the fitting itself. 
Answered by: Pete27
Date published: 2018-12-19

i have a 2000 chevy will this let me install a manuel oil gauge

Asked by: john tom
Hi John, to clarify, this adapter will work to install an oil pressure gauge in the valley of an LS derived V8 in place of the original oil pressure sender. You can see all the details on this gallery: Hope this helps!
Answered by: Joseph At AutoMeter
Date published: 2018-12-19

do you have a oil pressure adapter similar to #2268 but m16x2.0 to 1/8npt or 1/4npt

Asked by: Performance Robert
  • y_2024, m_7, d_20, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.42
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_US, sid_2268, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_autometer-us
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 8.88ms