Cart

FITTING, ADAPTER, METRIC, M10X1 MALE TO 1/8" NPTF FEMALE, BRASS

$14.95
Shipping in 2 business days
Free Shipping over $99
Hassle Free Returns

Description:

1

Quick Specs

1/8" NPT Female to M10x1.0 Male
Feature Points
  • Constructed from solid brass
California Residents: Prop 65 WARNING prop65 Cancer, Birth Defects and Reproductive Harm www.P65Warnings.ca.gov

REVIEWS:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 110.76ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

QUESTIONS:

Have gm350('96) w/hole in blk face up, to right of distributor need a 1/8-NPT fitting to an oil pressure gauge. Can't ID threads that hole. Tried 3/8-24 goes 2 turns 1/8-NPT too big. Will M10-1/8 NPT fit?

Asked by: Oldgolpher
Thank you for your question. We recommend taking the threaded bolt to a store to check the threads.
Answered by: Natalia from AutoMeter
Date published: 2020-12-15

I want to put a Flexilla 1/8 NPT hose on a Milwaukee cordless grease gun  The particular Milwaukee model has a METRIC 10X1 (M) hose end. Will your adaptor work?  Thanks.

Asked by: JimL
We have never tested this specifically with those products but it has an 1/8" NPT female to M10x1 male adapter so if those are the fittings on your products, this should work.
Answered by: Zach from AutoMeter
Date published: 2019-04-30

Will the end of a temperature sender fit through the other side of this? such as this https://www.autometer.com/low-temperature-sender-60-210f-gauges.html

Asked by: bretly
Thank you so much for contacting us. Unfortunately, with a hole that small, you'll be limited to using the shallow depth temperature sender: https://www.autometer.com/shallow-depth-electric-temperature-sender-250-300-and-340-deg.html This unit is compatible with Air Core Temp Gauges (though not included with them): https://www.autometer.com/catalogsearch/result/?q=water+temp+air+core#1&profile=products Hope this helps!
Answered by: Joseph At AutoMeter
Date published: 2018-07-23

Is the 10x1 metric thread a taperd pipe thread or strait? As you'r showing the fitting with a copper gasket I,m guessing strait.

Asked by: torch
Thank you for the question. The 2265 features a straight M10 x 1.0 thread and will include the pictured crush ring. The female part of the adapter is designed to accept a tapered 1/8" NPT fitting.
Answered by: Matt from AutoMeter
Date published: 2018-04-06

Item #2265 is M10 x 1 male to 1/8 NPT female. Do you have a fitting that is M10 x 1.5 to 1/8 or 1/4 NPT? Thanks.

Asked by: Bowtie 1
  • y_2021, m_3, d_1, h_17CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.14
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_2265, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_autometer-us
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 136.52ms
  • QUESTIONS, PRODUCT