You have no items in your shopping cart.
Proving a top quality Speedometer doesn’t have to cost a fortune, AutoMeter’s Mechanical Speedometers are a great solution for any vehicle with a cable drive transmission. Using a 5/8”-18 fitting on the back and calibrated for 1000 rpm at 60 mph, these simple, accurate and durable units have been time tested to provide great performance and exceptional value.
- ADDITIONAL NOTES
- Gauge kit includes bulb and socket assembly, red and green bulb covers, mounting hardware, and detailed instructions for installation
- Traditional rolling drum odometer and resetable tripmeter
- Accepts a 5/8" x 18 thread speedometer cable
- Calibrated for 60 MPH at 1,000 cable RPM
- Traditional incandescent lighting illuminates around the perimeter of the dial
- SHIPPED WITH
Bulb & Socket
- Red 3214 & Green 3215
- Bracket Included
Can this speedometer be connected to the front wheelHi Sieve, thank you so much for contacting us. Provided you have the proper cable, it won't make a difference if the speedometer is connected to the wheel, transmission or transfer case. You need a 5/8" - 18 threaded connection for the back of the speedometer and it's looking to see 1000 RPM at 60 MPH. Hope this helps!Date published: 2018-07-05
will this work with a 1986 Chevy Monte Carlo SS?Hi Jamal, thank you for the question. Yes, it will work, but it's not a direct "plug and play" or designed as a direct OE replacement. You will need a new cable that threads onto the speedometer (your factory cable pushes on to the speedometer) and if there are any calibration issues, these will need to be done at the transmission with the speedometer drive gear. While our electronic speedometer options will still not be a direct fit, they will require a sender, but offer a very simple calibration procedure.Date published: 2018-04-10
If I understand this correctly, 3 3/8 is outside diameter of the bezel. My question is whats the diameter of the hole for installation, or the diameter of the body of the gauge? Thanks.Hi Bill, thank you so much for contacting us. Actually, the OD of the bezel is 3-13/16". The gauge itself is designed to fit in a 3-3/8" hole. Hope this help!Date published: 2018-01-30
California Prop 65 Warning