Cart
In stock
Product
4427

2-5/8" OIL PRESSURE, 0-100 PSI, AIR-CORE, ULTRA-LITE

$106.38
Shipping in 5 business days
Free Shipping over $99
Hassle Free Returns

Quick Specs

  • Size:2-5/8" (66.7mm)
  • Type:Air-Core
  • Range:0-100 PSI
  • Lighting:Incandescent
  • Instructions: Download PDF

DESCRIPTION:

Quite possibly the most critical vital to monitor, engine oil pressure can mean the difference between making it home and needing to replace the engine. The patented air core meter movement provides the durability and accuracy that you expect from the AutoMeter name. Throughout 57 years of building the world’s best competition instruments, this meter movement has been the engine powering the machine that sets the benchmark. A single wire, 1/8” NPT oil pressure sender is included.
Feature Points
  • Traditional incandescent lighting illuminates around the perimeter of the dial
  • 12 and 16 volt compatible, well-suited with nearly every street car or race car electrical system
  • Gauge kit includes 1/8” NPT pressure sender, 1/4” NPT adapter, bulb and socket assembly, red and green bulb covers, mounting hardware, and detailed instructions for installation
  • AutoMeter’s race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle
Ships With
  • Includes Sending Unit: 2242
  • 3/8" NPT and 1/2" NPT adapter fittings
  • 3245
California Residents: Prop 65 WARNING prop65 Cancer, Birth Defects and Reproductive Harm www.P65Warnings.ca.gov

REVIEWS:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 4.89ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

QUESTIONS:

1989 Chevy Suburban V1500 5.7 My O.E.M. oil pressure switch not only displays oil pressure but also activates the fuel pump. By replacing it with the 2242 switch to work with the Auto Meter Air-Core oil pressure gauge, will my engine start AND run???

Asked by: Gator
This gauge is a passive read only device. You will need to retain the OEM sender for any special functions and use a T Fitting to use our sender as well.
Answered by: Jim from AutoMeter
Date published: 2022-12-07

I have this guage and have gone through 3 sending units in 4 years. It is not located near an exhaust or anything. What am I doing wrong?

Asked by: dlockett99
Thank you for your question. This will likely require some back and forth dialogue with our Tech Support Team, so we’d recommend sending us a detailed email here: https://www.autometer.com/contacts/
Answered by: Natalia from AutoMeter
Date published: 2020-12-30

I have a factory sensor that outputs 0-5V reference. I also have your 4427 oil pressure gauge. Does this gauge work with 0-5V reference? 

Asked by: Trevor72
This gauge works off an ohm resistance. You will need to utilize the sending unit that comes with the kit P/N: 2242.
Answered by: Steve from AutoMeter
Date published: 2020-04-28

Hi can i see picture of the oil pressure sending unit ? and does GM AC Delco oil pressure sending unit will work with auto meter pressure gauge ? Thank you

Asked by: Abdull
https://www.autometer.com/100-psi-electric-oil-pressure-sensor.html Thank you for your inquiry. This gauge uses the 2242 sender shown in the link above. Our gauge will not work with a GM pressure sender.
Answered by: Jim from AutoMeter
Date published: 2020-02-14

i need a sender unit for 4427 oil pressure guage can u link me

Asked by: squ33c
Thank you for your question. You will need P/N: 2242.
Answered by: Steve from AutoMeter
Date published: 2020-02-07

Is this an electrical gauge?

Asked by: Ryansiggy
Thank you for your question. Yes, it is an electric gauge.
Answered by: Zach from AutoMeter
Date published: 2019-09-06
  • y_2024, m_3, d_4, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.38
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_4427, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_autometer-us
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 4.93ms
  • QUESTIONS, PRODUCT