Cart
In stock
Product
3227

LINE, BRAIDED STAINLESS STEEL, #4 DIA., 3FT. LENGTH, -4AN AND 1/8" NPTF FITTINGS

$58.68
Shipping in 2-4 business days
Free Shipping over $99
Hassle Free Returns

Quick Specs

DESCRIPTION:

Includes 3ft. of #4 braided stainless steel line, firewall pass through grommet, 1/8" NPT female right angle to -4AN male fitting, -4AN male to 1/8" NPT male fitting, -4AN male to 1/8" NPT female fitting, 1/8" NPT to 1/4" NPT adapter bushing. Recommended for use with fuel pressure gauges. For use with mechanical pressure gauges and for remote mounting of electric gauge pressure senders.
Feature Points
  • 3ft hose length
  • PTFE lined hose, resistant to most fluids
  • Type 304 Stainless braid
  • Maximum Operating Pressure - 3000 PSI
  • Burst Pressure - 12,000 PSI
  • `-65 °F to 450 °F Operating Temperature Range
  • Includes 1/8"NPT male to -4AN female straight, 1/8" FPT Female to -4AN Male straight, 1/8" NPT Female to 1/4" NPT male straight, and -4AN to 1/8" NPT female 90 degree fittings
California Residents: Prop 65 WARNING prop65 Cancer, Birth Defects and Reproductive Harm www.P65Warnings.ca.gov

REVIEWS:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 49.11ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

QUESTIONS:

Is a chrome cup available?

Asked by: Gator
You can use either P/N: 2203, 3202, or 5203.
Answered by: Steve from AutoMeter
Date published: 2022-11-23

Is the FEMALE to #4 STRAIGHT fitting available separately?

Asked by: Route 45
Scott, Unfortunately this is not available separately online. If you would like to purchase this please give us a call at 866-248-6356 and one of our representatives will be able to assist you.
Answered by: Steve from AutoMeter
Date published: 2022-04-20

Will this kit work for engine coolant? Antifreeze..... Looking for this same setup to run a small coolant line from the back of the head on my XJ 4.0L. 4AN to 1/8" NPT.

Asked by: Hambone
Thank you for contacting us. Yes, fully compatible with antifreeze.
Answered by: Sarah from AutoMeter
Date published: 2021-09-30

Will this kit attach to the rear of my Bosch 1/8” male fitting on my oil pressure gauge?

Asked by: Bigdog
You should have no issues connecting to an 1/8" npt fitting.
Answered by: Steve from AutoMeter
Date published: 2020-05-13

Will this work with the mechanical phantom oil pressure gauge??

Asked by: Carlos1088
Thank you for your inquiry. This hose kit comes with the correct adapter to work with all of our mechanical oil pressure gauges.
Answered by: Jim from AutoMeter
Date published: 2020-03-31

Hello.-Will this kit hose (3227) fit the Product Manometer 2177 (Auto gage Mechanical 0-100 PSI). Thank you.

Asked by: Jeanroche
Thank you for your inquiry. The 3227 hose kit includes the correct 1/8" NPT adapter to connect to the 2177 pressure gauge.
Answered by: Jim from AutoMeter
Date published: 2019-12-12

Will this work for my in cab engine oil pressure gauge?

Asked by: Dsmith0906
Not sure. This line has special connectors on each end, so you would have to get the connectors that will fit on the line ends and to the connector on the gauge and the engine. Hope this helps.
Answered by: Chuck2035
Date published: 2019-06-12

Hi Guys, can you please tell me what size/thread type is the female fittings on both ends of the SS pressure line (3227 kit).

Asked by: Stubby
Thank you for your question. The fittings on the 3227 are 4AN fittings.
Answered by: Zach from AutoMeter
Date published: 2019-04-30
  • y_2022, m_12, d_8, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.34
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_13
  • loc_en_US, sid_3227, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_autometer-us
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 86.06ms
  • QUESTIONS, PRODUCT