Cart
In stock
Product
2252

SENSOR, TEMPERATURE, -40-300 °F, 1/8" NPTF MALE, REPLACEMENT, DIGITAL STEPPER

$31.03
Shipping in 2-4 business days
Free Shipping over $99
Hassle Free Returns

Quick Specs

DESCRIPTION:

SENSOR, TEMPERATURE, -40-300 °F, 1/8" NPTF MALE, REPLACEMENT, DIGITAL STEPPER
Feature Points
  • Sensor Body Material - Brass
  • Thread size - 1/8 in. NPTF
California Residents: Prop 65 WARNING prop65 Cancer, Birth Defects and Reproductive Harm www.P65Warnings.ca.gov

REVIEWS:

Rated 5 out of 5 by from LS in TJ I bought this for an LS swap into a 2004 Jeep TJ wrangler. I bought this, the 5226, and the 2277. The temperature to resistance scale matches the Jeep factory sensor so it works with the factory Jeep computer to drive the instrument cluster. It is installed in the rear of the passenger side head of the LS where there is usually a factory installed plug.
Date published: 2018-03-12
Rated 5 out of 5 by from Sender replacement The guy in service replaced the sender and it worked perfect. It's already in the 90's here in Tucson AZ. things get real HOTreal quick. Here's a photo of where the replacement sender went.
Date published: 2018-04-15
  • y_2022, m_6, d_27, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_2252, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_autometer-us
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 39.72ms
  • REVIEWS, PRODUCT

QUESTIONS:

Does this come with the plug with the wires in it?

Asked by: Jonathan1952
Hi Jonathan1952, thank you for your question. No, this is the sender only and it’s designed to work a harness like our 5226.
Answered by: Sarah from AutoMeter
Date published: 2021-10-28

What wiring harness part # goes with this sending unit and dash gauge?

Asked by: Bert
Thank you for your question. This sensor and appropriate gauge work with harness #5226.
Answered by: Zach from AutoMeter
Date published: 2019-06-13

Is this compatible with the 6937 water temp gauge

Asked by: Aka47
Thank you for your question. Yes, 2252 is the appropriate sensor for gauge #6937.
Answered by: Zach from AutoMeter
Date published: 2019-09-11

Hi, I purchased these 2252 temp sensors and noticed they did not come with the connectors. Can you tell me the part number for the proper 2 pin connector to use. I dont need a harness.. just the connector. Thanks You

Asked by: Jefe
Thank you for your inquiry. As the 2252 is a replacement part for our gauges, it is not supplied with a mating pigtail. Our harnesses are only sold complete. Please contact our Tech Support team at 866-248-6357 for options.
Answered by: Jim from AutoMeter
Date published: 2019-05-28

Hello, I would like to know the #2252 probe Length from the Threads to Tip? Also the Diameter of the probe? This info is needed, so I can figure length of adapter required for some AN-10 oil cooler lines. Thanks, Greg

Asked by: Greg93111
Thank you for your question. The diameter of the probe is 0.22" and the length after the threads is 0.55".
Answered by: Zach from AutoMeter
Date published: 2019-05-17

Is this suitable for Elite Gauge 5659-05702 100-300f dual range please?

Asked by: Calvin1032
Thank you for your question. Yes, that is the appropriate sensor for your gauge.
Answered by: Zach from AutoMeter
Date published: 2019-07-28

Id like to get a trans temp reading to my Holley ECU & AutoMeter electrical temp gauge. Is it as simple as splicing the signal wire from this sensor to both devices? If the ecu can send the signal, Id rather not unless thats the only way, limited outputs.

Asked by: Big_John
Thank you for your question. It is not quite that simple. We would not recommend just splicing into the wire from the sending unit as you could skew the readings and you will need to know the cal. points before being able to splice into that signal properly. I would recommend contacting our support team for help with this. You can reach them at 866.248.6357 or https://www.autometer.com/contacts
Answered by: Zach from AutoMeter
Date published: 2019-03-15

 Will this work on a digital temperature gauge 

Asked by: Mike Mike
Thank you for your question. Yes, this temperature sensor will work with our digital gauges.
Answered by: Zach from AutoMeter
Date published: 2018-10-15
  • y_2022, m_6, d_28, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_US, sid_2252, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_autometer-us
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 74.74ms
  • QUESTIONS, PRODUCT