In stock


Shipping in 2-4 business days
Free Shipping over $99
Hassle Free Returns

Quick Specs


Feature Points
  • All shift lights plug directly into Digital Shift Controller or AutoMeter tachometer with dedicated shift light connector
  • Includes Amber lens and yellow night cover
  • Measures 5 in. Deep x 3 in. High x 1.625 in. Diameter.
  • Current Draw: 1.4 A
California Residents: Prop 65 WARNING prop65 Cancer, Birth Defects and Reproductive Harm


  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 10.31ms
  • bvseo-msg: HTTP status code of 404 was returned;


What tach and shift light do you recommend to use with an MSD Grid controller in a Stock Eliminator car.

Asked by: Gangster
MSD Grid has a dedicated tach output. You may select any of our tachometers. This one will work fine:
Answered by: Jim from AutoMeter
Date published: 2024-01-18

will this light work with MSD 7535 aand how to wire it

Asked by: vic1129
This light would need a shift light controller to work. You could not hook it directly to your MSD box. Please give our tech team a call for help picking out the right shift light for your build.
Answered by: Alex at AutoMeter
Date published: 2023-08-16

Can the plug be removed to separate the wires as long as you match up power and ground?

Asked by: AJ Ortiz
This light will function without the plug. One wire to power and one to ground.
Answered by: Jim from AutoMeter
Date published: 2022-10-20

Will Tach #6997 hook to Light #5334 using extension Wire #3257? If yes, would the light's RPM activation be adjustable using the adjustment in the Tach? Thank You

Asked by: 7734knight
Thank you for your question. Unfortunately, it will not work. You will need P/N: 5312 in order for the shift light to work.
Answered by: Natalia from AutoMeter
Date published: 2021-02-04

I have an Autometer shift light Purchased new in the mid 90s for a 1200 mL sportster engine motorcycle. Is there a way for me to wire this into a 2019 Subaru WRX?

Asked by: barrybuel
Thank you for your inquiry. Please call our Tech Support Team at 866-248-6357 for assistance with this light.
Answered by: Jim from AutoMeter
Date published: 2020-04-02

How to hook up shift lite to a MSD al-3 

Asked by: Lb2519
Thank you for your question. This shift light needs to be attached to one of our tachometers or shift light controllers in order to get a signal.
Answered by: Zach from AutoMeter
Date published: 2019-11-11

I have a 5334 amber pedestal shift light with no installation instructions and it only has 2 black wires coming out of the back. Can you tell me where these should be connected? Thanks

Asked by: mjmeyer
Thank you for your question. This unit has a plug on the end of the two wires that would plug right into our pedestal mounted tachometers. For further assistance please call our tech line at 866-248-6357.
Answered by: Steve from AutoMeter
Date published: 2023-03-11

Can the ProLite 5334 be used with the 5312 Controller for shift light indication? I ask because the wiring diagram for the 5312 Controller shows a connection to shift lights but it looks like a molex-type connector while the 5334 only has two leads.  

Asked by: Rockitdoc
Thank you for your question. Yes, you can use these two together. You can remove the connector. One wire is power and the other is ground, as long as you connect the positive from the 5312 to positive from the 5334, and then ground to ground from 5312 to 5334. As long as you match up those connections, it will work just fine.
Answered by: Zach from AutoMeter
Date published: 2019-04-19
  • y_2024, m_4, d_17, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.41
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_15
  • loc_en_US, sid_5334, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_autometer-us
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 10.72ms