2-1/16" WIDEBAND PRO PLUS AIR/FUEL RATIO, 6:1-20:1 AFR, COBALT
Knowing the exact air/fuel mixture running through your engine is the most important factor to extracting the highest levels of performance and durability. Not all wideband gauges are created equal.
- Size:2-1/16" (52.4mm)
- Range:6:1-20:1 AFR
- Lightning:Digital LED
- Instructions: Download PDF
Knowing the exact air/fuel mixture running through your engine is the most important factor to extracting the highest levels of performance and durability. Not all wideband gauges are created equal. AutoMeter utilizes an advanced calibration method that automatically calibrates your gauge on every startup to assure you of the highest degree of accuracy over the entire lifespan of your sensor (no free air calibration is ever necessary). Compatible with nearly all fuel types, the AutoMeter Pro Wideband has a configurable display to pinpoint the exact range you want to keep an eye on. An advanced peak recall function and lean warning system make sure you’re safely making power, whether on the track or on the street. An automatically dimming display tailors light output for any condition. Data logging output is included for one wire or two wire systems in both lambda or AFR. Our specially designed O2 sensor and wiring harness are included for ease of installation. Quite simply, there isn’t a more accurate or easy to live with wideband gauge available on the market.
- Gauge kit includes custom tuned .1 AFR Resolution Bosch LSU 4.9 Sensor, 8ft. wiring harness, 304 stainless steel weld-in bung, mounting hardware, and detailed instructions for installation
- 0-5v data and serial data outputs for ECU, data acquisition unit, or Laptop tuning
- User programmable range for Rich/Stoic/Lean conditions
- Peak recall/memory
- 10:1 to 20:1 AFR range for gasoline applications
- 12 and 16 volt compatible, compatible with nearly every street car or race car electrical system
- User Programmable Warning Function
- Display data in Lambda or numerical A/F ratio
- M18X1.5 Fitting and Plug
- Wire Harness
Good afternoon my question is how far away from another o2 sensor does the autometer sensor need to be so that one doesn't disrupt the other sensor readings? I am adding this sensor to my car for data logging and quick refence.
I have the cobalt wideband afr and boost gauge that the numerical LED went bad. Can I buy a replacement gauge only?
I know this gauge has the ability to auto dim, but is there an option to have the unit dimmed via a hard wired illumination connection? i plan to use this in conjunction with the 6197 which appears to have this feature
Just wondering if this can have the black outter surround like the blacked out series of this gauge? Thanks
Can it work with the Haltech WBC1 kit? Do you sell the gauge only? What is the part number please
Can it work without the sensor.. i mean i have haltech WBC installed on my car.. can i use the output and tap it into the input wire of the gauge?
Will the gauge work on a diesel engine?
I have found that there may not be enough room prior to the downpipe cat to add a second bung for my AFR sending unit. Is there a way to supply the stock SES (?) with a signal as well as my wideband?
You may also like:
2-1/16" BOOST/VACUUM, 30 IN HG/30 PSI, MECHANICAL, COBALT Product #6103$91.72
2-1/16" FUEL PRESSURE, 0-100 PSI, STEPPER MOTOR, COBALT Product #6163$224.51
2-1/16" BOOST/VACUUM, 30 IN HG/20 PSI, MECHANICAL, COBALT Product #6107$91.35
2-1/16" BOOST/VACUUM, 30 IN HG/45 PSI, MECHANICAL, COBALT Product #6108$99.95
2-1/16" FUEL PRESSURE, 0-15 PSI, STEPPER MOTOR, COBALT Product #6162$245.99
2-1/16" FUEL PRESSURE, 0-30 PSI, STEPPER MOTOR, COBALT Product #6161$234.33