2-1/16" WIDEBAND PRO AIR/FUEL RATIO, 6:1-20:1 AFR, ELITE
Knowing the exact air/fuel mixture running through your engine is the most important factor to extracting the highest levels of performance and durability. Not all wideband gauges are created equal. AutoMeter utilizes an advanced calibration method that automatically calibrates your gauge on every startup to assure you of the highest degree of accuracy over the entire lifespan of your sensor (no free air calibration is ever necessary). Compatible with nearly all fuel types, the AutoMeter Pro Wideband has a configurable display to pinpoint the exact range you want to keep an eye on. An advanced peak recall function and lean warning system make sure you’re safely making power, whether on the track or on the street. An automatically dimming display tailors light output for any condition. Data logging output is included for one wire or two wire systems in both lambda or AFR. Our specially designed O2 sensor and wiring harness are included for ease of installation. Quite simply, there isn’t a more accurate or easy to live with wideband gauge available on the market.
- Size:2-1/16" (52.4mm)
- Range:6:1-20:1 AFR
- Lighting:Digital LED
- Instructions: Download PDF
- Gauge kit includes custom tuned .1 AFR Resolution Bosch LSU4.2 Sensor, 8ft. wiring harness, 304 stainless steel weld-in bung, mounting hardware, and detailed instructions for installation
- 0-4V data output feed for ECU, data acquisition unit, or Laptop tuning
- User programmable range for Rich/Stoic/Lean conditions
- Peak recall/memory
- 10:1 to 20:1 AFR Range for Gasoline Applications
- 12 and 16 volt compatible, compatible with nearly every street car or race car electrical system
- User Programmable Warning Function
- Display data in Lambda or numerical A/F ratio
- M18X1.5 Fitting and Plug
is there a shorter extension wiring harness than 25'. I need about another 5-6 feet, even an 8' would do. but 25 foot is kinda long if so may I have the part number thanks James
Some of the LED lights on the gauge display no longer illuminate, rendering reading the gauge useless. Please let me know how this can be corrected. Thank you.
Does this gauge allow you to change colors like the analog elite series gauges? Primarily the digital display? I have the oil temp gauge and like it a lot. I was able to set it up so that it closely matches my factory gauges in appearance.
I there a way to run this on duel exhaust with an o2 sensor in each pipe?
Can it be used for a motorcycle and is waterproof
The “Additional Notes” tab indicates a 0-5V data but the instructions pdf indicate a 0-4v output. Which is correct?
You may also like:
WIRE HARNESS, EXTENSION, 25 FT., WIDEBAND AIR / FUEL RATIO, PRO Product #5253$59.95
2-1/16", PEDESTAL W/ CARBON FIBER CUP Product #2121$56.13
OMNI-POD, LOW PROFILE MOUNT, 2-1/16" GAUGE Product #2205$25.66
2-1/16" BOOST/VACUUM, 30 IN HG/30 PSI, STEPPER MOTOR, ELITE Product #5677$243.01
2-1/16" FUEL PRESSURE, 0-100 PSI, STEPPER MOTOR, ELITE Product #5671$236.99
2-1/16" OIL PRESSURE, 0-100 PSI, STEPPER MOTOR, ELITE Product #5652$236.16