Cart
In stock
Product
3279

FITTING, SNUBBER ADAPTER, 1/8" NPT MALE TO 1/8" NPT FEMALE, STEEL, FOR FUEL PRESSURE

$28.47
Shipping in 2-4 business days
Free Shipping over $99
Hassle Free Returns

Description:

Required for installation of 30 psi Fuel Pressure gauges on pre-injection pump Diesel Applications in order to protect sending units from excessive pressure spikes during start up. 1/8" NPT Male to 1/8" NPT Female.

Quick Specs

Required for installation of 30 psi Fuel Pressure gauges on pre-injection pump Diesel Applications in order to protect sending units from excessive pressure spikes during start up. 1/8" NPT Male to 1/8" NPT Female.
Feature Points
  • 1/8" NPT Male to 1/8" NPT Female
  • Required for installation of 30 psi Fuel Pressure gauges on '98-02 Dodge Cummins Diesel Applications in order to protect sending units from excessive pressure spikes during start up Required for installation of 30 psi Fuel Pressure gauges on '98-02 Dodge Cummins Diesel Applications in order to protect sending units from excessive pressure spikes during start up. 1/8" NPT Male to 1/8" NPT Female.
  • Manufactured from stainless steel
California Residents: Prop 65 WARNING prop65 Cancer, Birth Defects and Reproductive Harm www.P65Warnings.ca.gov

REVIEWS:

  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 59.89ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;

QUESTIONS:

When installing a mechanical fuel pressure gauge on my 4 bt 390 Cummins in my backhoe,  do you need a snubber if you are using an isolator? 

Asked by: ROM41
Thank you for your question. This is not necessary on a mechanical fuel pressure gauge.
Answered by: Steve from AutoMeter
Date published: 2020-01-29

Is hose kit #3227 required or could this snubber be installed directly into a tee in the fuel line?

Asked by: Myles75
Thank you for your question. The snubber could be installed directly if it fits the port, however, as you add adapters and fittings to the end of the sending unit it can get fairly top heavy. This can cause it to be more drastically affected by vibration and lead to a premature failure. That is why we recommend using #3227 and remote mounting the sensor.
Answered by: Zach from AutoMeter
Date published: 2019-01-18

Is this unit used on '04 Cummins Diesels

Asked by: John Poopman
Thank you for your question. Yes, we would recommend using this snubber on '04 cummins diesels. It will not have any negative effects if you use the snubber and you do not actually need it, so if you are unsure if you need it or not, the safe bet is to use it.
Answered by: Zach from AutoMeter
Date published: 2019-01-10

Do we need this if installing the sensor on a FASS system?

Asked by: Tom234
Thank you for your question. We recommend using a snubber on all '98-02 applications regardless of if they have aftermarket parts or not. The snubber will not have any negative affects if it is used when it is not necessary, but there could be negative affects if it is not used and it should be.
Answered by: Zach from AutoMeter
Date published: 2018-11-27

Is this an orifice type restrictor? If so, what size is the orifice?

Asked by: Ted21
  • y_2021, m_9, d_23, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_3279, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_autometer-us
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 94.09ms
  • QUESTIONS, PRODUCT