Only %1 left
2-1/16" WATER TEMPERATURE, 100-250 °F, AIR-CORE, ULTRA-LITE
As low as $75.63
Shipping in 5 business days
Free Shipping over $99
Hassle Free Returns
- Size:2-1/16" (52.4mm)
- Range:100-250 °F
- Instructions: Download PDF
A high water temp can be detrimental to an engine. Heat is the enemy of performance and reliability. Keep tabs on your temps with the most trusted water temperature gauge on the market. AutoMeter’s advanced 1/8” NPT temperature transducer is included for a simple installation on any application.
- Traditional incandescent lighting illuminates around the perimeter of the dial
- 12 and 16 volt compatible, well-suited with nearly every street car or race car electrical system
- Gauge kit includes 1/8” NPT temperature sender, 3/8” and 1/2" NPT adapters, bulb and socket assembly, red and green bulb covers, mounting hardware, and detailed instructions for installation
- AutoMeter’s race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle
- 3/8" NPT and 1/2" NPT adapter fittings
Have a 05 RAM 2500 with 2 1/16" pillar gauges 3 Q's. 1) Do I need anything special (besides mount) to move them above the mirror? 2) Are there red or orange lights to replace the white? pref. LED 3) Can the bezel be changed? pref. black
You should be able to relocate these gauges without issue. The T3 bulbs listed here will work: https://www.autometer.com/catalogsearch/result/?q=Led%20Bulb&Trigger=ac The bezel is pressed on by machine and cannot be removed by the consumer.
Date published: 2022-08-26
Hello, the glass fogs up inside a few minutes after starting the car, even though it's 80° F and there's no excess humidity. How can I prevent the gauge glass fogging up? Thanks.
Unfortunately things like this can happen with it shipping from our location here in Illinois. The best thing would be to use a hair dryer or heat gun and keep it at a low heat setting. Keep the dryer/heat gun roughly 3-4" away and evaporate the moisture within the unit. If there are any issues after this please give us a call at 866-248-6356.
Date published: 2022-07-07
I don't understand in detail the pdf with instructions that you posted on your website. Please can you post or email me a different installation guide that is easier to understand or more detailed for this water temperature gauge? Thanks.
We only have the PDF instructions found on the website. If you have specific questions on the installation process you can give our tech support team a call at 866.248.6357 and we would be happy to walk you through it.
Date published: 2022-06-08
If I tap the sending unit to a hose line, do I need to attach a gound wire off the sending unit as well? Also, does 16 gauge wire work as well as the 18 gauge or do you recommend strickly using 18 gauge wire?
If you are remote mounting the sending unit, you would need to ground the sending unit. 16 Gauge wire would work.
Date published: 2022-05-17
Is this a mechanical or electric gauge?
This is an Air-Core, or a Short Sweep Electrical Gauge.
Date published: 2022-05-11
what is the total outside dimension on a 2 1/16 gauge and total outside dimension on a 2 5/8 gauge
Rich041, The dimensions of the outside of each of these gauges are as followed: 2-1/16": 2-1/4" 2-5/8": 2-7/8"
Date published: 2022-04-19
I have this Temp Gauge , I am changing the Intake and looking for a New Temp Sending Unit will the 2385 work with this Gauge , if not which one do I need , Thank You . Bob
The correct sending unit for this gauge is 2258. The 2385 will not work correctly with this gauge.
Date published: 2022-02-10
Are separate 3A fuses recommended for 2 gauges because one shared fuse might burn out too soon? Also, fuse not needed for light circuit because the bulb is acting as the fuse? Thanks for this and previous response.
Ultimately, a fuse is not considered a requirement, but a recommendation. If you run a fuse for 2 gauges, you can use one fuse through a single power wire before it breaks off to each gauge. You may run a fuse on the light, but because it's a recommendation and there is little to risk with a bulb going out, it would be purely optional.
Date published: 2022-01-23
You may also like:
FITTING, ADAPTER, METRIC, M12X1.5 MALE TO 1/8" NPTF FEMALE, BRASS Product #2277$16.05
FITTING, ADAPTER, METRIC, M12X1.75 MALE TO 1/8" NPTF FEMALE, BRASS Product #2278$17.91
FITTING, ADAPTER, HEATER HOSE, 5/8", 1/8" NPTF FEMALE, BRASS Product #2280$44.66
FITTING, ADAPTER, HEATER HOSE, 3/4", 1/8" NPTF FEMALE, BRASS Product #2281$50.49
FITTING, ADAPTER, RADIATOR HOSE, 1" TO 1.25", 3/8" NPTF FEMALE, ALUMINUM Product #2282$60.88
FITTING, ADAPTER, RADIATOR HOSE, 1.5", 3/8" NPTF FEMALE, ALUMINUM Product #2283$56.91