You have no items in your shopping cart.
- Description
-
Getting great performance or saving money doesn’t have to be choice. Engineered by AutoMeter in Sycamore, IL, The Auto Gage line of instruments provide the best bang for the buck performance in the industry. For a fast street car or a weekend racer, Auto Gage provides levels of accuracy and durability unheard of in the price category. With countless wins in magazine comparison tests, the best value in gauges comes from exactly the place you’d expect it to. AutoMeter.
- ADDITIONAL NOTES
-
Feature Points
- Includes bulb and socket assembly with red and green bulb covers
- SHIPPED WITH
-
Adapter/Fitting
- 1/8" NPT Male to 1/8" compression fitting, 1/8" NPT Female to 1/8" compression fitting, 1/8" NPT to 1/4" NPT bushing, 3/8" NPT and 1/2" NPT adapter fittings.
Tubing
- 10 ft. nylon tubing - 6 ft. Capillary Tube
Bulb & Socket
- 2357
Mounting Hardware
- Bracket Included
- Reviews
-
- Questions
-
Does gauge console 2392 come in a larger size? such as 2 5/8
Thank you for your question. We do not have this kit in a larger size. You could purchase a panel #3232 and choose any two 2-5/8" gauges to install in it.Date published: 2019-08-05I loosened the nut behind my water temp gauge and tried to remove the capillary tube in order to get the gauge out of the mounting pod before learning about it. The tube was loose but I could not remove it. Did I destroy the seal?
Thank you for your question. The tubing is pretty securely sealed to the back of the gauge, however, it is possible. If the ether gas inside the tubing can or is leaking out, the gauge will no longer operate properly.Date published: 2019-07-09Since I hate idiot lights, can this be used in a 1977 Lincoln Mk V?
Thank you for your question. This is certainly compatible with your application, but you may need adapters to convert the threads of the probes to the thread of the ports on your vehicle.Date published: 2019-07-09What type of material is used for the tubing on the oil guage
Thank you for your question. The oil pressure gauge will come with 6 feet of nylon tubing. As an alternative you can use our part #3224 which is 6 feet of copper tubing.Date published: 2019-01-11What is the length and height of the two gauge console?
Thank you for your question. The front of the 2392 two gauge console is 5-1/16" wide and 2-7/8" tall.Date published: 2018-09-13Will this coolant thermocoupler screw into a LS head to replace the electrical sensor? It’s size in the LS head is 12mm x 1.5. Thanks
Hi Thomas, thank you so much for contacting us. This temp gauge will not fit into an LS head without drilling and tapping it. You'd need to use a radiator hose adapter as mechanical gauges are much too large for such a small fitting: https://www.autometer.com/catalogsearch/result/?q=Radiator%20Hose&Trigger=ac#1&profile=products You can see a writeup on our preferred way to install gauges on an LS derived engine here: https://www.facebook.com/pg/AutoMeterProductsInc/photos/?tab=album&album_id=10150417363640587 Hope this helps!Date published: 2018-05-29Why can't I seem to find a two gauge console with a chrome mount, black gauge faces, and silver bezels? I have a 70 model Torino, and do not want a black console with white gauges, or a black console at all.
Hi Miguello, thank you for the question. The only chrome consoles we offer are in a 3-gauge configuration. A couple options would be model 2349 or 2399.Date published: 2018-04-19Hello, I know the gauges can be removed from the mount... But does that mean that they could be put into a pillar instead?
Hi there, thank you for the question. Our pods and pillar mounts are designed mainly for the AutoMeter gauges and not the AutoGage. The AutoGage are slightly wider in diameter and require a slight increase in the hole diameter on the pod.Date published: 2018-01-15
California Prop 65 Warning
