You have no items in your shopping cart.
Traditionally, paring the proper fuel level level gauge to the application could be a more difficult task than it needed to be. The AutoMeter Digital Stepper Motor Fuel Level Gauge drastically simplifies the process with it’s easily configurable resistance range. With 7 common configurations stored in memory from the factory, the vast majority of all applications are covered. In the instance your fuel level sender is not included in these preconfigured ranges, an innovative custom calibration mode allows any sending unit that operates between 0 and 280 ohms, empty or full, to be easily paired. Our “snapshot” programming method will allow you to capture the empty and full readings and the gauge does the rest. No matter your application, there simply isn’t an easier solution for fuel level monitoring available on the market. A direct plug in wiring harness is included for ease of installation.
- ADDITIONAL NOTES
- Features Hi-Def™ through-the-dial blue LED lighting with LED lit pointer
- Vibration and water-resistant
- Adjustable Scale w/ 7 preset ranges for common fuel sender types
- Programmable anywhere between 0-280 ohms
- Includes gauge mounting hardware and installation instructions
- Full sweep precision digital stepper motor meter movement
- SHIPPED WITH
I see this shown as blue backlighting in some places and blue or white in others. I cannot use blue backlighting. Can the illumination bulb be externally accessed and changed? I need either red or amber.Thank you for your inquiry. The 19609 is available only with blue led lighting. This lighting cannot be changed.Date published: 2019-07-02
Will this gauge replace the stock unit on a '98 FXD?Thank you for the question. This is a universal gauge that mounts into a 2-1/16" diameter hole. Since it's not necessarily model specific, we would not be able to provide any confirmation as to what it may fit.Date published: 2018-07-18
Hi. do you sell a fuel level gauge that will work with 40 ohms to 250 ohms or do i need a programmable type? also does the programmable gauge need to be re calibrated if the battery is disconnected ? cheers NickHi Nick, a 40-250 ohm sender will require our programmable gauge. Once the gauge is calibrated it does not require constant power to hold the calibration. You can lose all power to the gauge and vehicle and the calibration will remain intact.Date published: 2018-03-01
California Prop 65 Warning