SIGNAL SPLITTER / ADAPTER, OBD-II
Shipping in 2-4 business days
Free Shipping over $99
Hassle Free Returns
This low profile OBD-II signal splitter / pass through allows for remote location of connections for AutoMeter products like AirDrive, DashLink, DashControl and SmartConnect instrumentation while providing an additional easy to access connection point for other onboard devices requiring access to the OBD-II data stream.
- Connects to existing vehicle OBD-II port providing to remote mount connections to mount additional devices.
- 10 inch straight through leads with strain reliefs between 16 pin male and 16 female connectors compatible with J1962 OBD-II Standards
- Device and vehicle compatibility may vary. Signal slitter designed to maintain OBD-II data signal integrity across two remote connection points, but does not correct for data bus termination, traffic conflicts, or compatibilty of attached devices.
Rated 5 out of 5 by Luc de course from Great feature This connector is well design, excellent quality an fonctionality.
Date published: 2018-04-03
Rated 1 out of 5 by WillinTX from Doesn’t work Bought to run both my Dakota gauges and Ngauge to have multi gauge access and it didn’t work. Slowed the Ngauge refresh rate down to nothing and made the car throw a code.
Date published: 2020-08-22
I'm looking for an obd port splitter for my 2008 Chevy Silverado. Do you have them? If so can you send me the link?9
https://www.autometer.com/signal-splitter-adapter-obd-ii.html Thank you for your inquiry. See the attached 5323.
Date published: 2020-02-03
Will product # 5323 obd2 splitter fit my 2015 ram 3500 with a 6.7l Cummins?
Thank you for your question. This is a universal splitter which should have no issues connecting to your OBD-II port in your truck.
Date published: 2019-10-29
Is it like other Y adapters? Or does it actually allow control of two devices at same time or will one hang up?
Hello, Thank you for your question. This will allow you to control two devices, but it depends on the devices being used to whether or not they will lock up. For further questions please call our tech line at 866-248-6356.
Date published: 2019-09-27
Will this split the OBD2 port on a 2014 Ford Fiesta ST?
Thank you for your question. Yes, it is compatible with all OBD-II ports.
Date published: 2019-06-21
If you have a car that was not originally equipped with a super charger and you have installed one, will the air drive system boost gauge read the boost?
Hi there, thank you so much for the question. Yes, you sure can. The AirDrive OBD-II Module supports up to 2 additional auxiliary sensors. Using this sensor kit will allow you to read boost off an aftermarket supercharger with the AirDrive Boost gauge and AirDrive Module: https://www.autometer.com/airdrive-0-45-psi-boost-pressure-sensor-kit-optional.html
Date published: 2018-02-15
CURIOUS, WHAT MAKES THIS ONE ANY BETTER THAN THE OTHER SPLITTERS I HAVE SEEN ? WILL THIS WORK WITH THE IOS DASH LINK AND ALSO WILL HAVE A WAYLENS DASH THAT USES A FOB TO REAL TIME DATA ON CAMERA DATA. BASICALLY BE WORKING AT THE SAME TIME ..
Hi there, thank you so much for the question. The functionality of multiple OBD-II devices is usually going to be based on the devices themselves and if they function while sharing the port with another device. We've not tested every possible combination and unfortunately wouldn't know if both the DashLink and your other device would work together.
Date published: 2018-02-08
Will this work on a 2011 f-250 super duty XLT? and I can leave my H & S mini maxx programmer connected if I have to go to the ford dealership?
Hi Bruno, thank you for the question. This is an OBD-II splitter, which should allow for that if your device connects via the OBD-II port, but we would not know compatibility or how functionality would be affected with products other than our AutoMeter brand products.
Date published: 2018-01-22