AutoMeter’s new state of the art AirDrive module provides a plug and play solution that wirelessly transmits data through a secure WiFi network from your vehicle to our award winning AirDrive gauges. Program configurable colors, warning points and peak recall functions through AutoMeter’s free AirDrive smartphone app. Quick and easy installation is as simple as plugging the control module into the vehicle’s OBDII port, mounting and powering gauges, and connecting to the mobile app, eliminating any fear of voiding factory warranties on your new vehicle. The AirDrive system is capable of broadcasting two additional analog sensor inputs to deliver information not found on your vehicle’s data bus. Take plug and play performance to the next level with the AutoMeter AirDrive system.
Works with most 1996 and newer OBDII vehicles. Download the free iOS or Android AirDrive App to verify compatibility and available parameters.
Works with most 1996 and newer OBDII vehicles. Download the free iOS or Android AirDrive App to verify compatibility and available parameters.
For use with AutoMeter’s AirDrive gauges and mobile app
WiFi connectivity to smart phone or tablet devices
Two additional sensor inputs for expanded parameters
Micro USB port for PC update
Ships With
Wire Harness: Yes
California Residents: Prop 65WARNING
Cancer, Birth Defects and Reproductive Harm www.P65Warnings.ca.gov
Videos:
REVIEWS:
Rated 1 out of
5 by
Titus from
Doesn't Work CorrectlyI have had this product for about 3 months and I haven't been able to get it to work. Once you plug in the OBDII Module it shuts off after about 20 seconds and it doesn't matter what vehicle its plugged into. I've been on the phone back and forth with Autometers tech hotline but my concern is still not resolved. I even sent my module back so they could "test" it but when I received it back the product still did not function correctly. Autometer is a great company with a lot of great products but this one truly missed the mark for me. I wish I would have purchased the elite series instead.
Date published: 2019-10-25
Rated 1 out of
5 by
Joseph_A from
Great Idea But Does Not Work.Bought three gauges and the dongle. I Don't know if the gauges work because the dongle would not work. Autometer advertises Hassle-Free Returns but they will not accept returns once the item has been opened even if it does not work, so almost a month after spending just under a thousand dollars, I have three useless gauges while I wait on my brand new dongle to be "repaired".
I have purchased the Airdrive Dongle and three gauges for my 2015 Jeep JK. The problem is when I install the Dongle it powers up before I turn on the ignition during set up , then it will turn off during the set up process. any suggestions ?
Asked by: Bummble
Please give our tech support a call at 866-248-6356.
Answered by: Steve from AutoMeter
Date published: 2022-08-01
I bought the system installed it complete does the system handle my 2018 mustang GT everything hooked up correctly just do not know what pad to select to get to work on my boost and feel pressure
Asked by: Spy51
Thank you for your question. Please give our tech line a call at 866-248-6356 to assist you further with this.
Answered by: Natalia from AutoMeter
Date published: 2021-03-04
I am planning to purchase the Fuel Pressure 9171, Boost/Vacuum 9159, Oil Temperature 9140 for a Mustang GT 2016. How reliable is the system compared to the the Elite gauges?
Asked by: Eddie2016
Thank you for your question. These gauges will also need the dongle the plugs into the OBD-II port on the vehicle. For what you are doing, I would use the Elite series gauges as some of the data from the vehicle is estimated as not all the information on the vehicle is available.
Answered by: Natalia from AutoMeter
Date published: 2021-01-12
Does this draw power when the car is shut off? In other words can I leave it plugged into my car without having to worry about it draining the battery?
Asked by: Ronnie
Thank you for your question. No, this unit will only draw power when the key is switched on.
Answered by: Zach from AutoMeter
Date published: 2019-07-12
Can you add to the parameters say if a pid isn’t available ? for example I have a 2005 Dodge Ram srt10 I’m adding a supercharger so I need a boost gauge along with a few other gauges that my truck doesn’t monitor. I have a iPad in my dash and want to show
Asked by: Naterbug
Thank you for reaching out to us. There are 4 auxiliary sensor options available for AirDrive; 6050, 6052, 6054, and 6056. They can be found within the following instructions:
https://www.autometer.com/media/manual/2650-1884.pdf
https://www.autometer.com/media/manual/2650-1877.pdf
If you have additional questions, give us a call at 866-248-6357 or send us and email here: https://www.autometer.com/contacts
Answered by: Jim from AutoMeter
Date published: 2019-07-03
does the gauges have to connect to WIFI every time you start your car? Or once it is set up, you don't have to mess with it again? I understand that it needs updates once in a while, so you need to connect every so often, is this correct?
Asked by: PoPo
Thank you for your inquiry. Once the 9110 is set up, the WiFi is pretty much automatic. While there may be some updates available in the future, this will not be a common occurrence.
Answered by: Jim from AutoMeter
Date published: 2019-07-02
Does this module work with Torque Pro app?
Asked by: sickSVT
Thank you for your question. No, this is made to only work with our AirDrive app.
Answered by: Zach from AutoMeter
Date published: 2019-05-13
Is there a limit to how many gauges you can run off the unit?
Asked by: CDG306
Thank you for your question. No, there is not a limit to how many gauges you can run off this unit.