You have no items in your shopping cart.
Due to the complexity of this product, this product ships in 4 weeks from the date of purchase.
13 Input MFDL, Blk, 0-10.5k RPM (Incl: Display, sensor & network harness, Driveshaft RPM Sensor Kit, USB DataDrive, Logging (14 channels, 500 Hz sample rate, 2MB), DataPro Drag software & user manual).
AutoMeter recommends contacting our tech agents at (866)248-6357 prior to purchase for any questions or concerns regarding this product, installation, use, or accessories related to this product.
The AutoMeter MFDL display systems are designed specifically for the harshest environments. The carbon composite housing is IP67 sealed against water and dust intrusion and will easily withstand 20g of continuous vibration and 50g of shock. The analog pointer provides a quick and clear display for engine RPM while the digital display layout is configurable to your specifications using multiple pages for your axillary instrumentation needs.
The MFDL can support nearly limitless amount of discrete analog sensors joined with its integrated 3 Axis Accelerometer. Data collection can occur at up to 500 Hz and the internal memory keeps track of your runs. User definable warnings display across the digital display and illuminate the warning LED placed to the side of the tachometer to alert the driver to critical information.
- Dimensions - 8.3" Wide x 5.2" High x 1.4" Deep
- Carbon Composite Housing
- Single 19 pin MIL spec connector and motorsports wiring loom utilizing Mini Sure Seal connections for ease of installation and removal
- 13 analog inputs for discrete sensors. Expansion modules available separately for additional inputs
- DataPro Designer PC Setup utility
- User configurable from display via external 3 button interface for at track changes.
- Initial release supports 6 layers or screens selected from user- configurable layouts
- Display features digital values for vehicle parameters and configurable text warning messages
- Patented Predictive Lap Timing Display for Driver and Vehicle Development
- DVL Compatible
- 3 pulse/digital or analog inputs
- 5 analog inputs (0-5V)
- 3 external switches
- Internal 3-axis accelerometer +/-6g
- Internal battery voltage
- 1 USB port: data exchange, configuration, copy/upload, & firmware updates.
- 2 MB Onboard Datalogging Memory
- Sample rates up to 500 Hz
- Includes powerful DataPro Analysis Software
- IP67 sealed
- Operating temperature range: 20ºF to 180ºF
- Humidity: 0-100% RH
- Continuous vibration up to 20g, Shock up to 50g
- Weight: 1.5lbs
- Motorsports grade wiring harness included
- ADDITIONAL NOTES
Total Recording Channels
- Includes ST918024-101 ECU ES Extender, ST269512 Driveshaft RPM Kit, ST269526 6ft Cable Extender, ST269528 Drag Logger Harness, ST269620 DataDrive, and DataPro Software.
- Adjustable Sample Rate Per Channel = 1-200Hz
- Highspeed Download True CAN-USB Device, with remote access port. Direct access to logger not required for download allowing greater mounting flexibility.
- Multiple Run Recording and Storage. Passes time and date stamped when recorded, so you know which run occurred when even if you can't download immediately after a pass.
- Water, Dust/Dirt, Shock, and Vibration Proof! Fully sealed to IP67 standard. Ensures that your data will be captured and stored no matter what.
- Ideal for straight line competition formats including drag racing, pulling, and land speed racing.
- Tri-Axis Accelerometer +/-6g
- Battery Voltage Channel
- Add Up To 10 More Recording & Sensor Input Channels with Expansion Module #9610.
- Windows XP, Vista, and 7 (32 & 64 bit operating systems) Compatible DataPro Analysis Software
- SHIPPED WITH
- Includes Driveshaft Sensor and Collar
- WIRING INFORMATION
Hi ya I purchased a auto meter stack dash from one of your distributors here in New Zealand, we have fitted to our race car, turned it on and it all reads in miles and gallons etc How do we change this to k/hr and ltrs etc Many thanks Thank you for your question. We will need some more specific details from you. Please contact our tech team with your part # and serial number for your dash. You can contact them at 815.895.8141 or via https://www.autometer.com/contactsDate published: 2018-12-03
Can not get the channels available to match the channels selected ? Specifically the EGT outputs.Hi Myles, we're not aware of a specific setting or issue that would cause this. We'd recommend reaching out to our Technical Support Team at 815-895-8141. Or you can email us here with more specific details: https://www.autometer.com/contactsDate published: 2018-09-11
California Prop 65 Warning