Cart

SENSOR MODULE, GPS SPEEDOMETER INTERFACE, 16 FT. CABLE, INCL. GPS ANTENNA

$212.13
Shipping in 2-4 business days
Free Shipping over $99
Hassle Free Returns

Description:

Tickets are no fun. Calibrating a speedometer isn’t a great deal of fun either.

Quick Specs

Tickets are no fun. Calibrating a speedometer isn’t a great deal of fun either. AutoMeter's GPS Speedometer Interface is the no fuss solution to complete your speedometer installation. Ideal for offroad applications with large wheel and tire combinations, racing gearboxes, and applications where packaging considerations prevent conventional speed sensor or cable installations.
Feature Points
  • Plug and Play with AutoMeter Electronic Programmable Speedometers.
  • Lightning quick 10 Hz signal update rate is the fastest available.
  • Fully sealed and paintable magnetic micro antenna (Dimensions: 1.472 in. x 1.339 in. x 0.508 in.). Includes 16 ft. of wiring for plenty of mounting versatility.
  • GPS module is fully sealed against water and dust. Includes 6.5 ft. wiring harness. Case Dimensions: 3 in. (6 in. w/ wiring & connectors) x 2.5 in. (4 in. w/ mounting tabs) x 1 in.
  • One touch calibration process takes only seconds for most other electronic speedometers.
California Residents: Prop 65 WARNING prop65 Cancer, Birth Defects and Reproductive Harm www.P65Warnings.ca.gov

REVIEWS:

Rated 5 out of 5 by from GPS Speedometer Sensor Was having problems with the sending sensor on my 2006 Boss Hoss with an Autometer electronic speedometer. After going through several sensors, I installed the Autometer GPS and now have instant accurate speed readings. No needle flutter but constant dead on readings.
Date published: 2020-04-26
Rated 5 out of 5 by from Works great Mounted in defrost vent. Works great very accurate and fast response
Date published: 2018-02-08
Rated 5 out of 5 by from Thanks I really like this because of it’s size and ease of mounting. I have not used it yet just for mock up.
Date published: 2017-11-05
Rated 5 out of 5 by from Autometer for the Win! If you're looking for accuracy, style and great quality
Date published: 2019-01-30
Rated 5 out of 5 by from I like the GPS I am so happy with the GPS I like it they work great
Date published: 2020-08-04
Rated 5 out of 5 by from jeep yj Much better than using magnets on the driveshaft. !
Date published: 2020-04-16
  • y_2021, m_7, d_24, h_23
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.18
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_5289, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_autometer-us
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 81.59ms
  • REVIEWS, PRODUCT

QUESTIONS:

Will this work with the autometer stack dash

Asked by: Jnash30
You can most certainly pair this with our Stack dash.
Answered by: Steve from AutoMeter
Date published: 2020-05-13

Can the antenna be placed under the hood? instructions state it has to have a clear view of sky.

Asked by: lammy
I use mine in a jeep with a soft top...no problem, If under hood might be a problem. Look at it this way...it operates as a GPS. A GPS must have a clear view of the sky. How would your GPS work under the hood or your cell phone signal for that matter? It comes with a long cable...give it a try!
Answered by: Lamar
Date published: 2020-05-06

Hi A M team how does this sensor get the signal? do i need a sim card ore does it work over my mobile phone?

Asked by: Ehlers
No phone required it gets a satellite signal. Mine has never failed. 
Answered by: Quicktrip
Date published: 2020-04-26

Hi will this be compatible with my speedo that I purchased from you August 4th 2016 order number #100008042   3 1/8 speedometer SKU1988

Asked by: Vic Scott
Thank you Steve , ordered today
Answered by: Vic Scott
Date published: 2020-04-07

My speedometer has a red, purple and black wire coming out of back side. Does this GPS unit wiring easy?

Asked by: Boss Hoss
Thank you for your inquiry. The installation is indeed an easy one. When you are ready to install, please call our Tech Support Team for assistance: 866-248-6357
Answered by: Jim from AutoMeter
Date published: 2020-03-27

Can this GPS unit be used in conjunction with my 2006 Autometer electronic speedo? I want to eliminate the pick up sensor at the driveshaft due to constant problems. Looking for a way to retain my speedo and get input from the GPS antenna conversion.

Asked by: Boss Hoss
Thank you for your inquiry. This GPS Interface will work on any of our electric speedometers, including the one you have.
Answered by: Jim from AutoMeter
Date published: 2020-03-27

can this be used with Product #: 4490-SPCC

Asked by: DART 69
Thank you for your question. This can be used with any of our electronic speedometers.
Answered by: Steve from AutoMeter
Date published: 2020-03-14

Does this GPS sensor have an output so it can be used as a ground speed reference for a stand alone ECU? I have a Link G4+

Asked by: LeeSTI
Thank you for your question. This only sends out a 12v square wave. For further assistance please call our tech line at 866-248-6357.
Answered by: Steve from AutoMeter
Date published: 2020-02-24

Will this plugin to a 1787 speedo?

Asked by: 3dodge3
Thank you for your question. This can be used with any of our electronic speedometer to obtain a signal for the gauge.
Answered by: Steve from AutoMeter
Date published: 2020-02-27

I just completed a LS swap. I have autometer electronic gauges in the car but have a Dakato Digital cruise control. It is DBW LS3. Will this control the cruise control as well as the speedo?

Asked by: Camaro Mark
Thank you for your question. You will want hook this up to the speedometer and then run a wire from the output terminal on the speedometer to your aftermarket cruise control. So this sends a signal to the speedometer, the speedometer will send the signal to the cruise control.
Answered by: Zach from AutoMeter
Date published: 2019-11-07

Does the GPS Speedometer Interface Module also support a MS3Pro ECU?

Asked by: RenSeg
Thank you for your question. We cannot guarantee compatibility with anything other than our electric speedometers. That being said. the Auto Meter GPS Speedo Interface outputs a 12v square wave that is compatible with every electronic speedometer we tested. While our testing is extensive, there is always a possibility that certain products from other manufacturers may not function properly.
Answered by: Zach from AutoMeter
Date published: 2019-10-30

Will this function with a 5v input and then consequently output in the 0v-5v range? Or does it need a minimum of 12v supply and then have the output reduced to 5V on the signal wire?

Asked by: RonW
Thank you for your question. Unfortunately, there is not a way to do what you are looking for. The module needs 12v power to function and there is no way to reduce the voltage of the 12v square wave signal output it produces along the purple wire.
Answered by: Zach from AutoMeter
Date published: 2019-10-09

hello autometer. I have this item #5289 GPS speedometer interface device. I need the pin out to the push on and lock connector that apply the voltage and output to the device, the connector has numbers stamped 1-4. What are the color pin out to each #

Asked by: John@lethal
Thank you for your question. The pin out for the #5289 module can be found here: https://www.autometer.com/media/5289_GPS_Interface.pdf
Answered by: Zach from AutoMeter
Date published: 2019-09-24

Does this work with pro comp electric speedometer?

Asked by: Sheroux
Hello, Thank you for your question. This will work with any of our electronic speedometers.
Answered by: Steve from AutoMeter
Date published: 2019-09-20

Will this item work with the factory electronic speedometer in a 1991 K3500?

Asked by: K3500
Hello, Thank you for your question. The Auto Meter GPS Speedo Interface outputs a 12v square wave that is compatible with every electronic speedometer we tested. While our testing is extensive, there is always a possibility that certain speedometers from other manufacturers may not function properly. This being a stock speedometer we have no real way of knowing if this unit will work for your application.
Answered by: Steve from AutoMeter
Date published: 2020-02-20

I have a fibreglass T bucket roadster, looking to place the antenna under the dash. Will it still work or does it need to be visible to the sky?

Asked by: Tbucket
I have found it better to be mounted in windshield for better reception.
Answered by: Wally
Date published: 2019-08-11

Is there a monthly fee for the use of the GPS.

Asked by: Michaelmcg920
No
Answered by: SleepyZ28
Date published: 2019-08-01

I have a 2001 Nissan pathfinder speedometer that specifies a 0-5 volt square wave at 2000 pulses per mile. Will the 5289 calibrate down to 2000 ppm. Do I need a potentiometer to get down to 5 volts or will oem speedometer accept 12 volt.

Asked by: Barbarrall
Thank you for your question. We have no information on your OEM speedometer and cannot confirm what type of signal it will be compatible with. Our module produces a 12v square wave signal. It can be calibrated to match the gauges ppm, including 2000 ppm.
Answered by: Zach from AutoMeter
Date published: 2019-07-12

i have a 1971 gmc and im geting it swapped with a 5.3 and a 4l60e and i want to use my stock guages on it will this work for that

Asked by: noe_suelo
Thank you for your question. The Auto Meter GPS Speedo Interface outputs a 12v square wave that is compatible with every electronic speedometer we tested. While our testing is extensive, there is always a possibility that certain speedometers from other manufacturers may not function properly.
Answered by: Zach from AutoMeter
Date published: 2019-07-08

Hi, I view 2 model of speed sensor GPS , 2 different price .. one with 10hz and other not spec . Please , I have your gauge speed on my Chevelle 71 ... let me know how is better for me ... I have a tr6060 trasmission and Ls3 engine on my Chevy .. thanks

Asked by: Fabio71
Thank you for your question.You will want to use the module #5289 because you do not have a GPS speedometer. Our GPS speedometers have the hardware internally to process the signal from the satellite, they just need the antenna, #5283 for the satellite to lock on to. This module, #5289 is used for electric speedometers that would typically get their signal from the transmission. 5289 includes the module box to convert the signal from the satellite into the same type of signal that comes from the transmission, and it also includes the 5283 antenna for the satellite to lock on to.
Answered by: Zach from AutoMeter
Date published: 2019-06-25

What is the difference between this GPS antenna and the one included in the GPS speedometer Many thanks, good job Antonio

Asked by: Antonio C
Thank you for your question. Our GPS speedometers have the hardware internally to process the signal from the satellite, they just need the antenna, #5283 for the satellite to lock on to. This module, #5289 is used for electric speedometers that would typically get their signal from the transmission. 5289 includes the module box to convert the signal from the satellite into the same type of signal that comes from the transmission, and it also includes the 5283 antenna for the satellite to lock on to.
Answered by: Zach from AutoMeter
Date published: 2019-06-21

is the unit waterproof to mount outside on the roof

Asked by: bobbywayne
I would not do that. It needs to stay dry.
Answered by: Wally
Date published: 2019-04-30

How do you calibrate the system?

Asked by: Jerry 33
No calibration is required if using an autometer gauge.. please read instructions, all information is on there... if you must do a manual calibration, its explained on the instructions
Answered by: SleepyZ28
Date published: 2019-04-09

If a person buys a GPS speedometer then will they also have to buy this device to make the GPS speedometer function?

Asked by: Don.
If the speedometer does not come with one you will have buy one. I am using the GPS unit with a Autometer speedometer.
Answered by: Wally
Date published: 2019-05-25

will this item work with AUTOMETER 7489 NV electronic speedometer?

Asked by: gary l chapman
Thank you for your question. Yes, this will work with the 7489 as well as any of our other electric speedometers.
Answered by: Zach from AutoMeter
Date published: 2019-02-26

Hello sir/madam, I was wondering if this unit would work with a kph speedometer ? Thank you very much !

Asked by: Lucas Fusée
Thank you for your question. Yes, this will work on a KM/H speedometer.
Answered by: Zach from AutoMeter
Date published: 2019-02-14

will this work with oem speedo in a 1990 chevy truck? it is an electronic 

Asked by: Lancer
Thank you for your question. You would need to check what type of tach signal your oem tachometer uses. The Auto Meter GPS Speedo Interface outputs a 12v square wave that is compatible with every electronic speedometer we tested. While our testing is extensive, there is always a possibility that certain speedometers from other manufacturers may not function properly.
Answered by: Zach from AutoMeter
Date published: 2019-01-16

I am having a problem when I turn the headlights on the speedometer gos dead, also same with my autometer electric tach.

Asked by: tim29
Thank you for your question. This will likely need additionally troubleshooting help from our tech team. You can call them at 866.248.6357 and they will be happy to assist you.
Answered by: Zach from AutoMeter
Date published: 2018-11-12

THE SENSOR 5289 IS COMPATIBLE WHIT THE SPEEDOMETER 4787-M?

Asked by: ALEXJANDRO
Thank you for your question. Yes, our 5289 gps module is compatible with all our electric speedometers, including 4787-M
Answered by: Zach from AutoMeter
Date published: 2018-11-05

Two questions,  1. When wiring one of your GPS driven Speedos, can the wire feeding the GPS Antenna be cut to a custom length? 2. When running a GPS driven Speedo, will I lose signal and readout when entering a tunnel or driving through an underpass?

Asked by: Shorty11
Thank you for the question. Our GPS antenna, model 5283, is the antenna we include with our 5289 and all of our automotive GPS speedometers. We do not offer as a custom length and highly advise against cutting and adjusting the length on your own. This would void any warranty and would likely cause issues with performance. Like all GPS devices, our GPS speedometers and senders will lose their signal in a tunnel or when the signal to the satellite is completely cut off. This will result in a temporary loss of signal which will cause our speedometer to simply drop to zero until the signal is reacquired.
Answered by: Matt from AutoMeter
Date published: 2018-08-20
  • y_2021, m_7, d_24, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.18
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_68
  • loc_en_US, sid_5289, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_autometer-us
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 73.98ms
  • QUESTIONS, PRODUCT