In stock
Product
3220
LIGHT BULB & SOCKET ASSY., T3 WEDGE, 2.7W & 4.6W & 4.9W, REPLACEMENT, TWIST-IN
$11.34
Shipping in 2-4 business days
Free Shipping over $99
Hassle Free Returns
Quick Specs
DESCRIPTION:
LIGHT BULB & SOCKET ASSY., T3 WEDGE, 2.7W & 4.6W & 4.9W, REPLACEMENT, TWIST-IN
Feature Points
Cancer, Birth Defects and Reproductive Harm www.P65Warnings.ca.gov
- Includes #168, #194, and #161 bulb options
- 37 (#168), 25 (#194), and 12.5 (#161) Lumen output options
- Current Draw: 0.35 (#168), 0.27 (#194) and 0.19 (#161) Amp options
- Average bulb life expectancy: 1,500 Hours (#168), 2,500 Hours (#194), 4,000 Hours (#161)
Cancer, Birth Defects and Reproductive Harm www.P65Warnings.ca.gov
REVIEWS:
Rated 2 out of
5
by
Maxs from
Ok
Had some difficulty with the socket staying in the gauge. Not sure the gauge is about 15 years old. That could have been the problem. Worked at the twist and finally was in the gauge.
Date published: 2019-11-15
Rated 1 out of
5
by
Willy D. from
Does no twist-in and falls out, will not lock in
Mine must be defective and I need a replacement, before I can complete the installation of the 0-15 PSI BOOST Gauge!!!
Date published: 2022-03-21
Rated 5 out of
5
by
Duane from
AUTOMETER CARBON FIBER GAUGES
Just installed our new Carbon Fiber 2 5/8 Autometer Gauges Good Looking super light weight
Date published: 2020-02-04
Rated 1 out of
5
by
I don’t have one from
Poor connections
the wire connections on 2/5 were bad fall right out
Date published: 2020-04-14
QUESTIONS:
how do you change the bulbs or do you need to do a complete assembly
Thank you for your question. The bulb can be removed from the socket and swapped out with another bulb.You can use the following: #168, #194, and #161 bulb options.
Date published: 2020-03-18
How long are the leads Thanks Duane
Thank you for your question. The cable length is roughly 6-1/2" - 7" long.
Date published: 2020-02-04
What gauge wire are the leads on these bulb sockets? I need to know because I am wiring a set of Actic White 2 1/16" Autometer Gauges into the dash of my '62 Ranchero.
Thank you for your inquiry. This light assembly uses 20 gauge wire.
Date published: 2019-12-05
I have an older fuel pressure gauge # 3411, I need a light socket for it. This is the older steel body type, single wire push in socket, what is the part number?
Thank you for your inquiry. The original metal light socket is no longer available. The 3220 is the correct replacement lamp assembly.
Date published: 2019-09-11
Can product 3220 be used to replace product 3212? I have gauges that have the twist in circuit board mount (3212) and I can't dim them because they share a common ground with the instruments... my led dimmer "dims" through the ground circuit.
Thank you for your question. Yes, you can use the 3220 bulb assemblies as an alternative to the 3212.
Date published: 2019-09-06
Will this socket fit in a 3 1/2” mechanical traditional chrome speedometer
Thank you for your question. No, for that speedometer you will want to use the socket #3211.
Date published: 2019-08-21
Do you ship to uk and if so how much will it be.
Thank you for your question. We do ship to the the UK. We ship internationally via UPS for a flat rate of $99.95.
Date published: 2019-04-09
i have an older cluster from you guys the plastic that holds the bulb is a white twist in. bulb is burnt out need a new one, how do i figure out what bulb i need for my cluster
Thank you for your question. 3220 sounds like the right replacement for you. I recommend contacting our tech support team to ensure you get the right part. You can contact them at 815.895.8141.
Date published: 2018-12-29
will these fit the 2 1/16" Phantom guages or is the 3211 the correct part number?
Thank you for your question. Yes, the 3220 will work in the 2-1/16" Phantom gauges.
Date published: 2018-12-29
Which lamp assembly do I order for AutoMeter speedo part # 105-2494
go to autometers website and look it up or call them.
Date published: 2019-07-20
Hey which light socket do I need for the ultra lite pro comp gauge? Product #4301
Hi Connor, thank you for the question. The 3220 is the correct socket and bulb for a 4301 gauge.
Date published: 2018-12-29
Where can I purchase some of these locally?
Hi Charles, thank you so much for contacting us. While we don't have access to all of our customers' inventories, we do have a large dealer network that may be able to assist. Check out our Locator here:
https://www.autometer.com/autometerlocator/
Hope this helps!
Date published: 2019-01-05
Hello, I have a pro-comp ultra-lite speedometer (#4492) is the only number on I need both light sockets for it is this the socket i need or can you direct me to the proper socket . thank you Mark I would also like the part number for the LED for that
No problem, [autometer #3220] is the bulb socket your looking for.
The LED light bulb your looking for is [SYLVANIA ZEVO 168 T10 W5W White LED Bulb]. both can be found on amazon or ebay. the LED bubs are pricey but once you use them you'll be switching all your dash lights to LED.
the sylvana bulb is the only LED bulb that will fit in the socket and fit in the hole for the gauge for the light socket.
Date published: 2018-12-29
I have a set of 2 1/8 gauge that work fine but the light fixture and wiring are missing. What is the correct replacement assembly for these?
i just purchased some used gauges and need light sockets for them.. they are ultra light gauges 2 5/8 and 5 inch speedometer
Can this Bulb & Socket assembly replace the one that came with the Phantom Voltmeter 5791?
Would this be the correct light socket for a 2-5/8 Sport-Comp ultra lite gauge with the plastic housing? Thank you.
Hi- what bulbs do i need for gauges 3348 and 3391 - t3 wedge?
You may also like:
Also Purchased With
Check items to add to the cart or
