INVISION LCD DASH KIT, 73-87 CHEVY & GMC FULL SIZE TRUCK, DIRECT FIT DIGITAL DASH
- Range:User Configurable
- Lighting:Digital LCD
- Instructions: Download PDF
Instrumentation is the focal point of any interior. Make your dash stand out from the crowd with the new InVision Digital Dash from AutoMeter. This complete Direct Fit Digital Dash System for 1973-1987 Chevy & GMC full size trucks comes with four user selectable screens and is a one model solution for your entire dash. Monitor the speedometer, tachometer, fuel level, oil pressure, water temperature, and volts all in one place. Upgrade your dash with the latest, modern LCD offering from AutoMeter.
- Requires no cutting, drilling or modification to factory pieces
- Monitors speedometer, tachometer, fuel level, oil pressure, water temperature, and volts all in a high resolution and colorful display
- 12.3” LCD display with four user selectable screens
- Features high beam & turn signal indicators as well as user selectable warning light
- All kits include a wiring harness and sending units for water temperature and oil pressure as well as a joystick for dash customization
- Adjustable RPM range and displays in imperial or metric measurements
- Helps protect your vehicle with visual or audible alarms - low fuel level/oil pressure/voltage and high water temperature
- Speedometer easily calibrates to OEM or aftermarket vehicle speed sensors and the tachometer is capable of calibrating to many engine types
- Speed sensor not included
- 2258, 2242
- 3/8" NPT and 1/2" NPT adapter fittings
- Brackets Included
My 1984 C10 has dual fuel tanks. Will the fuel gauge connect to the fuel tank selector switch on the dash or does it connect to the sending unit in the tank? In other words, will it read each fuel tank when switching tanks?
Hi I am doing an 2006 LS 4.8 motor and a 4l60e trans into an 85 c10. Do I need anything to get the transmission to work with this unit. I will be using all LS sensors. Thanks, Robert
Can I purchase the plastic storage cubby that is supposed to be screwed in place above the HVAC control?
Is there away to hook up a shift indicator? Will this dash display a PRND12?
Does the Invision Digital Dash have a outside temp and compass??
I have a six prong connector that is tied into my wiring harness. What is this for? I have a Chevy K20
How do we add the New fourth version on the Invision LCD? Did not see it listed in downloads.
2 months ago this set was $800??
is anything required to purchase along witht his kit? for a 1980 k5 blazer with a LS swap. Thanks very intrested in the project.
Hi - interested in buying one of these units for my truck. Do you ship to Namibia? Please advise - thanks Terry
will this work with the holley terminnator x system?
Will the invision handle cold temperatures. I'd love to have these gauges in my K5 blazer but it gets to -20° f would like to know if these are a good option before I'm stuck with something that doesn't fit my purpose
dash can be adjusted to metric ? kilometers per hour ?
DOES THIS COME WITH THE DASHBOARD?
I have '74 Blazer 2WD with a newer 5.3 Gen V LT and 6L80. What do I need to purchase to run with this dash ( GPS,etc). Is this upgrading with GPS display and graphics.
Can the tach signal from my MSD 7 box interface with the dash to read RPM's?
I bought invision guages for a 79 chevy. It has a ppump cummins in it and i want to run a tach for it and a gps module for the speedo. Can you direct me to the right part numbers. Thanks
I'm in the middle of an install in my cummins powered square body. I'm not finding any data or schematics on getting a tach signal. Not wanting to use the alternator. Is there a hall effect that will work?
My speedometer jumps when I get over 40-45 mph. it fluctuates back and forth quickly between about 5-6 mph to the point I don't know exactly how fast I am driving. I just calibrated based on instructions and still doing it.
I have a 1987 Jimmy 6.2 Diesel with 700r4. I assume your diesel tach adapter would be required to install as well as the gps speedo sensor kit. My question is what do I do about the cruise control? Currently cable drive with cc sensor on back of cluste
I am looking for a direct fit digital dash system for a 1972 chevy malibu
Im looking in to buying the InVision direct fit digital dash system for 1973-1987. is it possible to program it so i can see boost and egt in the display? regards Elvar
Can this read engine boost and EGT pyrometer and display this information?
is this a universal display that a OBD2 can plug into or would I need additional hardware to get full function?
Hi, there. Does this work on GM can bus or do I have to put in all sensors? I have 2017 L86 engine with 8L90 transmission
Are there any plans to integrate this to be compatible with a backup camera so you can view a backup camera on the dash screen
hi can the mph be changed to kph i would like to use this in a Australian car
I want this for a 5.3Ls on a 87 gmc Will this work with an electric transmission? And what other parts does it need to function properly?
Will having a manual transmission affect the performance of this product such as power surges and such. If so what can I do to fix it??
Do you ever plan to make make this for a 98 Chevy K1500? Or can we pay to have this custom made for it?
You may also like:
SENSOR MODULE, GPS SPEEDOMETER INTERFACE, 16 FT. CABLE, INCL. GPS ANTENNA Product #5289$240.66
SPEED SENSOR, MECH TO ELEC, GM & CHRYSLER, 7/8"-18 THREAD, HALL EFFECT, 16 PULSE Product #5291$108.47
GAUGE INSTALL KIT FOR LS ENGINES, INCL. FITTINGS, SHORT TEMP SENSOR, MANUAL Product #5284$44.99