Cart

SENSOR, SPEED, MECH TO ELEC, FORD PLUG-IN, HALL EFFECT, 16 PULSE

Special Price $94.08 was $104.53
Shipping in 2 business days
Free Shipping over $99
Hassle Free Returns

Description:

AutoMeter vehicle speed sensors generate the signal you need to make installing an AutoMeter electric speedometer in your vehicle quick and easy. Compatible with Ford transmissions with a plug-in style speedometer cable output, this vehicle speed sensor outputs a 16 pulse per revolution (PPR), 12v square wave signal.

Quick Specs

AutoMeter vehicle speed sensors generate the signal you need to make installing an AutoMeter electric speedometer in your vehicle quick and easy. Compatible with Ford transmissions with a plug-in style speedometer cable output, this vehicle speed sensor outputs a 16 pulse per revolution (PPR), 12v square wave signal. Featuring a mechanical cable output, this sensor has the ability to retain the mechanical cable in applications with mechanically driven cruise control.
Feature Points
California Residents: Prop 65 WARNING prop65 Cancer, Birth Defects and Reproductive Harm www.P65Warnings.ca.gov

REVIEWS:

Rated 5 out of 5 by from EASY INSTALL WORKS GREAT. I LIKE IT MUCH BETTER THAN OLD SPEEDO CABLE! YOU CAN
Date published: 2020-04-26
  • y_2020, m_11, d_26, h_16
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_5292, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_autometer-us
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 120.43ms
  • REVIEWS, PRODUCT

QUESTIONS:

Would this work in a np205 transfer case? As this is a truck with hi and lo it would need to pick from the rear of the transfer case and not the transmission.

Asked by: Mud_Runner24
Thank you for your inquiry. It is unlikely that this sender will install into your transfer case. Your application would benefit from the 5289 GPS Interface: https://www.autometer.com/universal-gps-speedometer-interface-module.html
Answered by: Jim from AutoMeter
Date published: 2020-01-17

I was wondering if I could pair the mechanical gear in my c4 transmission to the oem gauges in a 2006 Ford Mustang GT which has an electrical plug in for a speed sensor coming from the gauge side?

Asked by: Raz_s197
Thank you for your inquiry. This speed sensor will not properly drive an OEM speedometer.
Answered by: Jim from AutoMeter
Date published: 2020-01-10

will this work with a speedometer cable from a c4 ford transmission

Asked by: roo's rods
Thank you for your question. This will work for your application.
Answered by: Steve from AutoMeter
Date published: 2019-11-27

how far out does the complete unit protrude from the retaining clamp? I have to consider room in the xmember where the trans tailhousing sits.

Asked by: 33dobros
Thank you for your question. The total length of the unit is 4.8", with the probe end being 1". That will leave 3.8" outside the gear drive you will need to have space for.
Answered by: Zach from AutoMeter
Date published: 2019-07-31

on the model 5292 where do you connect the white wire connect to .

Asked by: ratrod50
Thank you for your question. The white wire goes to the signal terminal on the speedometer.
Answered by: Zach from AutoMeter
Date published: 2019-06-25

Hello, I would like to know if your Ford speed sensor works with the t45 manual transmission and if I could use it to make the stock gauge accurate again? It's no longer accurate due to different rear gearing and bigger tires in rear. Thank for your time

Asked by: Sam97
Thank you for your question. Our speed sensors are made to work with aftermarket gauges and it is highly unlikely they would work with a factory or OEM speedometer.
Answered by: Zach from AutoMeter
Date published: 2019-05-17

Hello there, I have a 1978 C4 trans with original cable, will this work? I'm connecting it to a glowshift speedometer.

Asked by: Nicksdirt
Thank you for your question. Yes, this will work with your transmission.
Answered by: Zach from AutoMeter
Date published: 2019-02-21

Not seeing exactly how the nylon gear attaches, is the factory clip that holds the gear on the factory cable, also required to hold it on this sensor?

Asked by: Mach351
Thank you for your inquiry. The 5292 will reuse the original nylon gear and clip from your OEM cable.
Answered by: Jim from AutoMeter
Date published: 2019-01-30

Will this work with a ford np205 transferase?

Asked by: garagefabs
yes because it goes into the transmission where the original cable speed gear goes not in transfer case
Answered by: FordDR
Date published: 2019-01-11

I have a 1965 mustang 289 with a c4 transmission. I am upgrading the wire harness and new gauges. Was wanting to put a electronic speedometer. Would this work for my car?

Asked by: Mustang65
Thank you for the question. If you have a speedometer cable provision, yes, the 5292 should work for you. Keep in mind, however, if you have no speedometer cable currently, you will need the nylon gear, normally found on the cable, to install onto our 5292 sender.
Answered by: Matt from AutoMeter
Date published: 2018-09-10

Will the 5292 work with my AOD, with mods.

Asked by: tycobb31r
Hi Richard, thank you for the question. If you have a speedometer cable provision, yes, the 5292 should work for you. Keep in mind, however, if you have no speedometer cable currently, you will need the nylon gear, normally found on the cable, to install onto our 5292 sender.
Answered by: Matt from AutoMeter
Date published: 2018-08-31

i wish to use this as a pulse generator for an aftermarket cruise control and retain my existing cable driven speedometer. Can you please tell me what physical type of end I need on my cable to plug into the pass through drive output drive on the 5292?

Asked by: Billgxl
Hi Bill, thank you so much for contacting us. The pass through on the 5292 accepts a standard Ford "clip on" speedometer cable. Hope this helps!
Answered by: Joseph At AutoMeter
Date published: 2018-07-23

Will this unit work on my 95 Toyota 4 runner, with the autometer speedometer, I don't know what pusle rate I need.

Asked by: John93308
Hi John, thank you for the question. This is very specifically a Ford sender. While we don't have confirmation on what a 1995 4Runner would use, it may be closer to this style if the cable threads onto the transmission: https://www.autometer.com/hall-effect-speedometer-sender.html Otherwise, we offer GPS speedometers and GPS senders as well as this universal style sender: https://www.autometer.com/universal-electronic-speed-sensor.html
Answered by: Matt from AutoMeter
Date published: 2018-07-13

HELLO TO WHAT TRANSMISSION DOES THIS SPEED SENSOR REMAIN?

Asked by: LUISGERARDO
Hi Luis, thank you so much for contacting us. This speed sensor is designed to replace the cable drive on older Ford transmissions that utilized the plug in style speedometer cable connections. It ouputs a 12v square wave at 16 pulses per revolution and is a perfect choice for driving an AutoMeter electronic speedometer. Hope this helps!
Answered by: Joseph At AutoMeter
Date published: 2018-05-17

If I install this sending unit with your 880082 speedo do I need to change my existing gear in my mechanical cable or can I use the same gear. I have a 77 f150 4x4 with a c6 trans. I have also put 35" tires and am planning on changing the gearing to 4.11

Asked by: Rick63
Thank you so much for contacting us. This should actually work perfectly for you. when installing this sender, you completely remove the cable from the equation and install the nylon gear that was on the cable on the speed sender. Our electronic speedometers are all designed to custom calibrated, so the gear ratio, tire size, etc don't actually matter. Once the sender is in, you do a two mile calibration drive and the AutoMeter speedometer and it figures out the rest based on the number of pulses it reads from the speed sender over that distance. Hope this helps!
Answered by: Joseph At AutoMeter
Date published: 2018-04-09

DOES THE 5292 PULSE SENDOR WORK IN A FORD FMX TRAMY?

Asked by: VINTAGEFORDRON
Hi Ron, thank you so much for contacting us. This speed sender should work perfectly with a Ford FMX. It's the same clip in style as the cables they used forever. Hope this helps!
Answered by: Joseph Mills
Date published: 2018-03-26

I have a ford aod transnission and i'm changing over to a ford C6 transmission. I have auto meter antioque beidge gaugas and sender (hall) now, what will I have to change to over to the C6 transmission, gear etc? Thank you, Carl Maglia

Asked by: aslydog
Hi Carl, thank you so much for the question. If your C6 transmission is "cable ready" and can accept a cable, our 5292 Sender will work. However, our 5292 sender does require the speedometer drive gear which would normally be removed from an existing cable then installed onto our sender. If you're missing this gear, you will have to source one.
Answered by: Matt from AutoMeter
Date published: 2018-03-08

I have a T5 transmission mated to a Ford 302. Currently my T5 has a mechanical drive. Will this electronic adapter work with my T5 and your speedometer part number 1389?

Asked by: GregH
Hi Greg, thank you for connecting with us. Yes, the 5292 sender should work on your transmission, but it will require the speedometer drive gear. Normally, when you'd remove an existing cable there would be a gear on the cable that would be removed then installed onto the 5292 sender. If you do not have that gear you'll need to source one from a transmission shop. Finally, this set-up will drive any of our programmable electronic speedometers, including the 1389.
Answered by: Matt from AutoMeter
Date published: 2018-02-28

will this fit a 76 ford 205 transfer case

Asked by: Hillbilly Highboy
Hi there, thank you so much for the question. Yes, this should fit your 1976 Ford. If you have no speedometer cable in there currently, you may need a speedometer gear that must go onto this sender.
Answered by: Matt from AutoMeter
Date published: 2018-02-05

is this item needed for a ford aod transmission to autometer electronic speedodometer?

Asked by: Anonymous

Does this replace the factory cruise control speed sensor thats inline with the speedo cable and drive pinion?

Asked by: Dollarbill
  • y_2020, m_11, d_26, h_16CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.12
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_29
  • loc_en_US, sid_5292, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_autometer-us
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 233.68ms
  • QUESTIONS, PRODUCT

You may also like: