Cart
In stock
Product
2198

GAUGE WIRE HARNESS, UNIVERSAL, FOR TACH/SPEEDO/ELEC. GAUGES, INCL. LED INDICATORS

$151.99
Shipping in 2-4 business days
Free Shipping over $99
Hassle Free Returns

Quick Specs

DESCRIPTION:

Ready to upgrade the instrumentation in your hot rod, but finding the wiring a bit daunting? AutoMeter has you covered with their Universal Gauge Wire Harness. Pre-terminated and color coded with detailed installation instructions, this product provides everything you need to wire a standard 5 or 6 instrument set, including turn signal and high beam LEDs!
Feature Points
  • Accomodates 5 or 6 gauge installations consisting of any AutoMeter In-Dash Tachometer, Speedometer, and four short sweep electric, air-core gauges (Fuel Level, Oil Pressure, Water Temperature, and Voltmeter)
  • Color coded and pre-terminated for simpified installation.
  • Includes: Main Wire Harness (gauge side and vehicle side with pre-terminated multi-pin separation connectors), Lighting Ground Wire Harness, 8 butt connectors, 8 crimp connectors, 2 green turn signal LEDs, 1 amber high beam LED, 1 red brake or check engine LED.
  • Not intended for use with the following AutoMeter gauge types: Digital Stepper Motor, Digital Display, Dual Gauge, Mechanical, Quad Gauge, or Tach/Speedo Combo.
California Residents: Prop 65 WARNING prop65 Cancer, Birth Defects and Reproductive Harm www.P65Warnings.ca.gov

REVIEWS:

Rated 5 out of 5 by from Gauges work and look much better than expected. Love these gauges. Definitely order the wiring harness. It made a two day project into a 12 hour day. I would also suggest getting a LabelMaker. Label all your wires before you cut them from your existing harness. I also ordered a Classic Dash to house my new gauges. It’s pretty much plug-and-play. I have a 69 Camaro and had a trim some of my dash pad. I did not use the LED indicator lights that were included with the wiring harness. I ordered much nicer LED indicators from Amazon.
Date published: 2018-01-11
Rated 5 out of 5 by from easy wiring I really didn't need to replace my gauge wiring, but this kit let me eliminate a lot of extra wires under my dash and made it very easy to hook up the gauges plus it gives me just one plug to use if I ever need to remove the instrument panel
Date published: 2022-02-22
Rated 5 out of 5 by from Saves a ton of headache Bought a six guage setup for my car...went to begin installing it and found I would have to make a harness. Went back online and the plug in harness. Wish someone told me when I purchased my guages. Worked great
Date published: 2020-06-15
Rated 5 out of 5 by from Amazing This make it so much easier to install the gauges in the dash
Date published: 2018-12-05
Rated 5 out of 5 by from Gauge set wiring harness A real timesaver, worth the money. Great customer service.
Date published: 2017-12-19
Rated 5 out of 5 by from Worth the money! Worth the money! saves a lot of time. good instructions,
Date published: 2018-08-03
  • y_2022, m_6, d_28, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_2198, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_autometer-us
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 74.85ms
  • REVIEWS, PRODUCT

QUESTIONS:

Are the turn signal indicator lights and hi lo beam indicator light included? I am using part 2142 new dash panel

Asked by: dutch
Yes they are although I recommend getting bigger led’s. The one with the kit are only about 1/8” in diameter. Any led would work. 
Answered by: Bigblue
Date published: 2019-01-19

what wiring harness do you recommend for the tach / speedo combo gauge and also to wire in the 4 other gauges (oil temp volt fuel) ? thanks

Asked by: Kevin
Hi Kevin, thank you so much for contacting us. Unfortunately, we do not offer a wiring harness for applications outside of the most common 5/6 gauge setup (this one to be specific). You might contact an aftermarket harness supplier such as American Autowire or Painless Performance as they would be more likely to have a wider range of options. Sorry for the bad news.
Answered by: Joseph From AutoMeter
Date published: 2018-11-17

Do I need the module sensor g p s with my electric gauges?

Asked by: misterR

Can I use the spedo wires to do oil pressure instead?

Asked by: STP28M

What is the second terminated plug labeled coil battery for?

Asked by: TedR

I would like to know the harness housing bullet connection type, i would like to add another wire to the harness since it has the room.

Asked by: Rband
  • y_2022, m_6, d_27, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.32
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_14
  • loc_en_US, sid_2198, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_autometer-us
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 88.65ms
  • QUESTIONS, PRODUCT