You have no items in your shopping cart.
SENSOR, TEMPERATURE, 1/8" NPTF MALE, REPLACEMENT, AUTO GAGE
- ADDITIONAL NOTES
- Sensor Body Material - Brass
- Thread size - 1/8 in. NPTF
- Includes 3/8 in. NPT and 1/2 in. NPT adapter bushings.
- SHIPPED WITH
Will this work with the LS style engine for a stand alone gauge?I would recommend using P/N: 2259 with any of our water temp gauges as that sensor is only used with our AutoGage line.Date published: 2020-05-27
I’m needing sending unit for trans temp for 2002 dodge 2500 , diesel ,four wheel drive ,automatic Hi, This 2385 sender is specific for our Auto Gage electric water temp gauges. Please contact our Tech Support Team at 866-248-6357 for assistance. Thanks, JimDate published: 2020-04-24
What's the omhs ratingHi, You will find the specs for the 2385 in this link: https://www.autometer.com/sensor_specs Thanks, JimDate published: 2020-04-21
I have a 1/8” NPT sender that I want to mount in my thermostat housing for my electric fan conversion but the thread size is 3/8” female .. is there an adaptor for this?Hi, While the 3/8" NPT adapter is included in this 2385 sender kit, we do not sell it separately. That said, the adapter is a common item available even at hardware stores, 1/8" NPT female on one end, 3/8" NPT male on the other. Thanks, JimDate published: 2020-04-09
I have a 2 5/8" sun electric water temp gauge and the sender has gone bad. Will your 2235 work on this gauge? If not, could you point me in the right directions?Ardon, The 2385 is a dedicated sender for Auto Meter Gauges We have nothing that is compatible with Sun gauges. Thanks, JimDate published: 2020-04-03
Hi, this is indicated to 3337-M gauge? Thank you.Thank you for your inquiry. The correct sender for your gauge is 2258: https://www.autometer.com/short-sweep-electric-temp-gauge-sender-250-300-and-340-deg.htmlDate published: 2020-04-02
G'day i have an autometer electric oil temperature gauge AU3348M will this sensor be compatible.Thank you for your question. This will only work with our Auto Gage line. You will need P/N: 2258 for the gauge you are inquiring about.Date published: 2020-03-12
I have an Autometer #2313 trans temp gauge and am looking for a sender.ThanksThank you for your question. That gauge is mechanical so it is built into the gauge. If the probe is damaged we recommend replacing the gauge since the mechanical gauges cannot be repaired after the cable/probe is damaged.Date published: 2020-03-09
California Prop 65 Warning