Cart
In stock
Product
BCT-200J

BCT-200J; Intelli-Check II Heavy Duty Truck Electrical System Analyzer

$1,502.49
Shipping in 2-4 business days
Free Shipping over $99
Hassle Free Returns

DESCRIPTION:

Professional grade, fully automatic electrical system tester specifically designed for diagnosing heavy-duty batteries and electrical systems.

The BCT-200J utilizes AutoMeter's advanced preventative maintenance testing mode to quickly check the battery and starting/charging system for any failures, saving time and money. Designed and optimized for deep cycle and starting batteries, flooded and AGM. DIN Connector serial port communication. 

Designed for the heavy-duty industry where accuracy is extremely important. Advanced DPL Technology is used for battery testing, including a battery bank test, to shorten the battery test procedure. Firmware includes AutoMeter's innovative automated-voltage drop test and J1708 information retrieval. This tester stores the last 120 tests which can be retrieved on its LCD display, printed to the optional infrared printer, or downloaded to a personal computer with the AC-10 PC adapter cable.

  • Designed for and used exclusively by heavy-duty truck and off-road equipment technicians
  • Tests flooded and AGM batteries and starting/charging circuits
  • Compatible with 24v charging and starting systems
  • Tests control circuit
  • Will test up to four batteries at one time
  • Patented automated voltage drop test
  • Optional cables for J1708 communication
  • Advanced Digital Pulse Load battery technology
  • Quickly identify the real electrical issues
  • Included external volt leads and AC-27 alternator adapters
  • Reverse polarty protected
  • New simplified preventative maintenance testing option
  • New AGM optimized battery testing option
Feature Points
  • The BCT-200J can perform a preventative maintenance test on the truck or tractor's electrical system to identify problems in a two-minute procedure. This feature will significantly cut down the preventative maintenance time on fleets.
  • The BCT-200J will test both the starter and the alternator showing the results of alternator amperage output, charging voltage, ripple amount and starter current draw. Diagnosing electrical issues fast and easy is why this product is a must have.
  • Will quickly and accurately test the vehicle's set of batteries, up to 4 at a time. It also tests single batteries with the same great speed and accuracy you have come to expect from any AutoMeter Test product.
  • Will perform voltage drop tests on the starting, charging, magnetic switch, and lift-gate and stinger cable circuits per TMC's RP129 recommended practices. Another advantage is that you can test wire integrity with simple easy to read menus.
  • Tests flooded and AGM batteries and starting/charging circuits.
  • Compatible with 24v charging and starting systems.
  • Includes battery bank test, which will test up to four batteries at one time.
  • Advanced Digital Pulse Load (DPL) technology - patented test process and algorithm allowing operators of this product to rapidly measure a battery’s ability to provide adequate cranking power necessary to start the vehicle.
  • V-Drop Technology – this unique AutoMeter feature utilizes a patented process to automate the measurement of voltage drop in the charging circuit during starter engagement to ensure vehicle systems are operating at peak performance.
California Residents: Prop 65 WARNING prop65 Cancer, Birth Defects and Reproductive Harm www.P65Warnings.ca.gov

Videos:

REVIEWS:

Rated 5 out of 5 by from it works. easy to use. ships quickly Easy to use and install on site. display result clearly and instantly. ships quickly.
Date published: 2019-04-01
  • y_2022, m_8, d_16, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.32
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_BCT-200J, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_autometer-us
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 62.74ms
  • REVIEWS, PRODUCT

QUESTIONS:

Does the BCT-200J use carbon pile to simulate a load?

Asked by: mZiegler
Thank you for your question. No, it uses a digital pulse technology to apply load.
Answered by: Zach from AutoMeter
Date published: 2019-11-04

What is the part number for replacement large clamps for the meter. also the amp rating of the clamps

Asked by: steve89
Thank you for your question. The replacement leads and clamps for the BCT-200j is part #AC-80. We use these clamps at a current of 400A for 15 seconds without issue.
Answered by: Zach from AutoMeter
Date published: 2019-08-20

Does the BCT-200J have an internal battery? Shipping question

Asked by: label
Thank you for your inquiry. The BCT-200J does have an internal battery. It uses a standard 9-volt Alkaline battery.
Answered by: Jim from AutoMeter
Date published: 2019-08-08

What is the HS code ?

Asked by: Nicole
Thank you for your question. The full Schedule B code is 9031808060. The HS code is 903180.
Answered by: Zach from AutoMeter
Date published: 2019-04-16

Every so often you have to do maintenance BCT-200J?

Asked by: SABRINA
Thank you for your question. You should not have to do routine maintenance to the BCT-200J. If you are having any issues or want to send it in to us for maintenance, you can contact our support team to get that taken care of. You can reach them at 815.895.8141 or https://www.autometer.com/contacts
Answered by: Zach from AutoMeter
Date published: 2019-04-12

I need to buy a hard case for this tester. Do you have a part number for case only?

Asked by: Greg Hightower
Thank you for your question. If you are looking for a carrying case, the AC24J is a hard carrying case which can be used with any of our handheld testers. We do not offer a hard case/cover for the unit if that is what you are looking for.
Answered by: Zach from AutoMeter
Date published: 2019-02-01

What is the best device from your product to check how good condition (battery lifetime) of AMG EXIDE battery on marine lifeboat 100 Ampere / Hours approximately 1000 CCA?

Asked by: Oleg
Hi Oleg, thank you for the question. If you are testing just the batteries as described, the SB-300 would be our recommendation. It cannot determine battery lifetime, but will provide % charge, volts, and measured CCA. https://www.autometer.com/sb-300-technician-grade-intelligent-handheld-battery-tester-for-6v-12-applications.html
Answered by: Matt from AutoMeter
Date published: 2018-08-08

Hi, We need to calibrate some BCT-200J model in Colombia. Who can calibrate for us 4 units of the BCT-200J model in Colombia or Latin America?

Asked by: AlexanderFonseca
Hi Alexander, thank you for contacting us. Our only authorized service center is here at our facility in Sycamore, IL. If you would like to send the testers in for evaluation, please give us call at 815-895-8141 to request an RMA. Or you can email us using this form: https://www.autometer.com/contacts
Answered by: Matt from AutoMeter
Date published: 2018-07-17

I am having trouble finding technical manual for the RC-300 Auto meter. Could you please assist regarding the same.

Asked by: Nitin
Hi there, thank you for connecting with us. Keep in mind, this is not the RC-300 that you posted this question on, but here is the link to the RC-300 manual: https://www.autometer.com/media/manual/2650-1385.pdf
Answered by: Matt from AutoMeter
Date published: 2018-04-08

I am trying to purchase the long leads with the clamps on the ends for a BCT-200J but I am not having much luck. Can I purchase them direct from you? Or can you send me to a dealer who can assist? I am in Rochester, NY.

Asked by: Shawn
Hi Shawn, thank you so much for contacting us. You can find replacement external leads for your tester here: http://www.autometer.com/catalogsearch/result/?q=external+volt+leads+testers#1&profile=products Hope this helps!
Answered by: Joseph At AutoMeter
Date published: 2019-01-22

After reading the pdf manual, I dont see where it says it can load test 24v batteries. It states it can test 24v charging systems but does not explicitly state it can load test a 24v battery.

Asked by: seand

Is it possible for this unit to display a loaded voltage reading when testing a single 12v battery?

Asked by: kj6391
  • y_2022, m_8, d_15, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.32
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_20
  • loc_en_US, sid_BCT-200J, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_autometer-us
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 76.51ms
  • QUESTIONS, PRODUCT

You may also like: