In stock


Shipping in 2-4 business days
Free Shipping over $99
Hassle Free Returns

Quick Specs

  • Type:Kits
  • Range:120 MPH/100 PSI/100-250 °F/8-18V/240ΩE-33ΩF
  • Lighting:Incandescent
  • Instructions: Download PDFDownload PDF


AutoMeter has brought together the most popular gauges into a simple kit. The kit includes a speedometer, water temperature, oil pressure, fuel level, and voltmeter. All senders included where applicable.
Feature Points
  • Traditional incandescent lighting illuminates around the perimeter of the dial
  • Kit includes fuel level sender (240E/33F), oil pressure sender, water temperature sender, bulb and socket assemblies, red and green bulb covers, mounting hardware, and detailed instructions for installation.
  • Speedometer features a traditional rolling drum odometer and a resetable tripmeter
  • Speedometer accepts a 5/8" x 18 thread speedometer cable and is calibrated for 60 MPH at 1,000 cable RPM
  • Domed Lens
Ships With
  • Fuel Sender 3262 - Oil Sender 2242 - Water Sender 2258
  • 3/8" NPT and 1/2" NPT adapter fittings
  • Brackets Included
California Residents: Prop 65 WARNING prop65 Cancer, Birth Defects and Reproductive Harm


  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getReviews, 7.67ms
  • bvseo-msg: HTTP status code of 404 was returned;


1985 Grumman / P30 1 Ton / New 1986 351 Chevrolet / rebuilt TH400 Transmission / fuel sending unit 095 ohms. Will this gauge set fit my van requirements?

Asked by: Dryshave
Thank you for your question. None of our gauges are vehicle specific or made to fit any OEM dash holes. This gauge set should certainly work with your application, however, our fuel level gauge is 240-33 ohms and will not work with your sender, you would need to use our sending unit.
Answered by: Zach from AutoMeter
Date published: 2019-04-22

Can I use this set on a 2000 Hummer H1?

Asked by: Louie
Thank you for your question. None of our gauges are vehicle specific and are not made to fit in OEM dash holes. Assuming you have the means to mount the gauges, they will certainly work with your application. The speedometer is cable driven, so you will need a speedometer cable on your transmission to operate it.
Answered by: Zach from AutoMeter
Date published: 2019-03-06

is there a 2-1/2 maching tach

Asked by: gizzi
Thank you for your inquiry on the 1808 Kit Box. We don't offer a 2-1/2" tach, but do offer a 2-1/16 matching tach, see the link below:
Answered by: Jim from AutoMeter
Date published: 2019-01-08

Can I get a kit with cylinder head temp instead of water temp? I’m running a air cooled engine

Asked by: High Beam
Thank you so much for contacting us. While our kits are a fixed configuration and can't be changed, you could very easily just swap in the 2259 sending unit (which works with the included gauge) for installation directly into the head. Unfortunately there is not a dedicated Head Temp gauge available to match this series. Hope this helps!
Answered by: Joseph At AutoMeter
Date published: 2018-06-25

What is the bezel OD of the 1808 speedometer?

Asked by: Dick
Hi Dick, thank you for connecting with us. The 3-1/8" Speedometer in the 1808 kit features an outside bezel diameter of 3-3/8".
Answered by: Matt from AutoMeter
Date published: 2018-03-08

Will this 5 piece kit fit the original 1964 Chevrolet El Camino instrument Cluster?? Thanks

Asked by: J. Gomez

Can I get a 6 gauge set of these with your glass lenses instead of acrylic?

Asked by: 3ford9
  • y_2023, m_4, d_1, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.35
  • cp_2, bvpage2n
  • co_hasquestionsanswers, tq_15
  • loc_en_US, sid_1808, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_autometer-us
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 66.33ms