5 PC. GAUGE KIT, 3-3/8" & 2-1/16", ELECTRIC SPEEDOMETER, AMERICAN MUSCLE

Thank you for your question. We do offer a speedometer in KM/H in the American Muscle series, but it is not available in this kit. The speedometer is model number 1288-M.

Thank you for your question. Yes, the matching clock is model #1284. For up to date stock information, please call us at 866.248.6357.

Thank you for your question. This kit will work with our P/N: 2133 dash panel. You can also use P/N: 2198 in order to make the installation simpler, but it's not needed if you are okay with doing your own wiring.

Thank you for your question. The ohm range of the fuel level gauge is 240-33. The pressure gauge uses a sensor #2242 and the temp gauge uses sensor #2258, both sensor specs can be found here: https://www.autometer.com/sensor_specs

Thank you for your question. You will need to order the parts for this kit individually if you wanted to swap out or more of the gauges. If you call our support team, they can help you put together a kit with a 5" speedo replacing the 3-3/8" one. You can reach them here: 866.248.6357

Thank you for connecting with us. Unfortunately, there is no exhaust temp or pyrometer available in the American Muscle Series. It's a popular line that we've continued to expand, so it's possible we could add it in the future, but no plans currently.

Thank you for your question. No indicator performs better than others with American muscle. Personally, I recommend product # 5343 to pair with American muscle gauges as it is a completely stand-alone product.

Hi Bruce, thank you so much for contacting us. Unfortunately the odometer portion of the American Muscle speedometer is only offered in red. We do make a clock in the American Muscle series, though it is not specific to any one year/make/model of vehicle: https://www.autometer.com/2-clock-illuminated-analog-american-muscle.html Finally, while we do not offer a direct fit panel in our lineup, our friends at Classic Dash do: http://classicdash.com/product/1963-67-corvette-6-gauge-panel-with-5-auto-meter-gauges/ Hope this helps!

Hi Hector, thank you so much for contacting us. The 2198 wiring harness is a great addition to this kit and definitely makes installation easier, but it is not required to install them. You can use any 18 gauge or better automotive quality wire and standard spade terminals. Hope this helps!

Hi Otis, thank you for the question. We do offer an LED kit, model 3283, that can be installed anywhere in your dash to provide turn signal indicators, etc, but we currently do not offer gauges that have them built in. For illumination the American Muscle Series features internal white LEDs and provides a vivid, through the dial lighting and lighted pointer. This can be wired so that it's on whenever the instrument is powered up or only at night when the headlights are turned on.

Hi Max, thank you so much for the question. I would recommend taking a look at our GT Series, which is similar to the American Muscle, but features an all black appearance. For an additional cost we can quote you on a special order of American Muscle gauges with black bezels. If you'd like a quote, give us a ring at 866.248.6356, hit the Chat link at the top of the page or you can email us here: http://www.autometer.com/resources/index/ask_a_question

Hi Ebrahim, thank you so much for contacting us. While we do offer a metric scale speedometer in the American Muscle series, it is not currently available in a kit. All of the pieces are available separately and can easily be put together. Here is a link to the exact speedometer you'd need: https://www.autometer.com/3-3-8-speedo-260-kph-programmable-am-muscle.html Hope this helps!

Hi Jeremy, thank you so much for contacting us. This kit comes with a 240 ohm empty, 33 ohm full fuel level gauge, as well as a matching universal sending unit. It will not work properly if you already have a 0-90 ohm sender. We do have a matching gauge available on its own here: https://www.autometer.com/2-1-16-fuel-level-0-e-90-f-sse-am-muscle.html You can certainly piece the kit together with individual parts or we can modify an existing gauge that you already have in our service department. If you need help putting together part numbers specific to your application, please don't hesitate to contact our service team at 866.248.6357. You can also hit the Chat link at the top of every page on the website or email us here: https://www.autometer.com/resources/index/ask_a_question Hope this helps!