You have no items in your shopping cart.
Getting great performance or saving money doesn’t have to be choice. Engineered by AutoMeter in Sycamore, IL, The Auto Gage line of instruments provide the best bang for the buck performance in the industry. For a fast street car or a weekend racer, Auto Gage provides levels of accuracy and durability unheard of in the price category. With countless wins in magazine comparison tests, the best value in gauges comes from exactly the place you’d expect it to. AutoMeter.
- ADDITIONAL NOTES
- Traditional incandescent lighting illuminates the front of the dial
- 12 and 16 volt compatible, well-suited with nearly every street car or race car electrical system
- AutoMeter’s race proven air-core electric tachometers provide quick and accurate readings with a needle so responsive it can go from 0 - full scale in 333 milliseconds
- Compatible with most 4, 6, and 8 cylinder engines (2 - 4 pulse per revolution ignition signals) with points, electronic, and most 12V high-performance racing ignitions.
- Optimize use of your engine's power band and improve vehicle run performance and driver gear changes with a rapid response, high visibility user-programmable shift light.
- SHIPPED WITH
Bulb & Socket
Hey! I wonder if this product fits my Harley Davidson Vrod Vrscf Muscle 2013? If this product does not fit you have someone else then Autometer shiftlight for my Vrod? . Very grateful for the quick response from you because it is a bit acute! Thank you for your question. Your 2013 Harley will have a CANBUS system. We do not have anything available that will work with that system.Date published: 2019-05-21
Will this work on a two cylinder Harley v rodThank you for your question. We would not recommend this gauge for use on a motorcycle as it is not water resistant. We would recommend getting a tach from our pro-cycle series. Keep in mind, newer model Harley's, around '14+, use a CAN system that none of our instruments will be compatible with.Date published: 2019-04-19
Is this compatable with 1970 mustang and will it hook up to the 12v resistor? Is the mounting for dash mount or can it be mounted in other areas?Thank you for your question. Yes, if you have a standard ignition system, you can get the tach signal directly from the negative side of the coil and it will work just fine for your application.Date published: 2019-04-19
Will this work on a 1989 Ford Mustang Thank you for your question. Yes, this will be compatible with your application.Date published: 2019-04-17
Hi I put this tach in my 2004 gt mustang 4.6 everything works lights but the tach does not work do I need something else please help thank uThank you for reaching out to us. Your situation seems like it will need some extra troubleshooting help, please contact our tech support team here: https://www.autometer.com/contactsDate published: 2018-10-15
hello I have this tach in my 86 k-5 blazer I have just put in a sbc 388 and at idle the needle is sitting on 0 but is there any way to fix this I am running a msd pro built distributer it has a tach wire that comes off of it that it is hooked in toThank you for reaching out to us. Your question is going to need additional support to answer. Please contact our technical service team for assistance. You can contact them here: https://www.autometer.com/contactsDate published: 2018-09-24
Will this tach work on my 2001 Chevy Silverado 5.3 v8? and if so, what's needed to calibrate it?Thank you for the question. Yes, the 233911 is compatible with your truck. You should have a white wire, pin #10 of the red connector at the PCM. This actually produces a 2 pulse per rev signal that is more like a standard 4 cylinder, so the tachometer will have to be set for a 4 cylinder. It's possible this white wire will not be there in which case you will need a tach adapter, model 9117. If you have any additional questions, give us a ring at 866.248.6356, hit the Chat link at the top of the page, or you can email us here: http://www.autometer.com/resources/index/ask_a_questionDate published: 2018-08-16
Can the shift light be rotated or re-installed on the right side of the tach?Hi Bill, thank you for the question. Yes, the Shift Light on the 233911 is held onto the tachometer by the mounting strap, so it is remote mountable and can be rotated to another position on the tachometer.Date published: 2019-01-21
California Prop 65 Warning