You have no items in your shopping cart.
Since 1957, AutoMeter has set the standard in performance, accuracy and durability with their legendary Tachometers. The absolute pinnacle of engineering and technology, it’s no wonder AutoMeter can lay claim to more motorsports victories than every other gauge manufacturer combined. The patented air core meter movement, wound in house to exacting standards, can move the needle from 0 - 10,000 rpm in 333 milliseconds. An inaugural inductee to the Hot Rod Speed Parts Hall of Fame, no other tachometer on the market has had anything approaching its impact on professional racing. Built for a lifetime of service under the harshest conditions, this is the no compromise tach for no compromise builds. When you’re ready for the best, there isn’t another choice.
- ADDITIONAL NOTES
- Traditional incandescent lighting illuminates around the perimeter of the dial
- Compatible with most 4, 6, and 8 cylinder engines (2 - 4 pulse per revolution ignition signals) with points, electronic, and most 12V high-performance racing ignitions.
- 12 and 16 volt compatible, well-suited with nearly every street car or race car electrical system
- Gauge kit includes bulb and socket assembly, red and green bulb covers, mounting hardware, and detailed instructions for installation
- AutoMeter’s race proven air-core electric tachometers provide quick and accurate readings with a needle so responsive it can go from 0 - full scale in 333 milliseconds
- SHIPPED WITH
Bulb & Socket
- Red 3214 & Green 3215
- Bracket Included
3-3/8" IN-DASH TACHOMETER, 0-10,000 RPM, PHANTOM is rated out of 5 by 1.Rated 4 out of 5 by Robertdat74 from nice white face It would have been good if the wiring harness for the connections were included with the meter.Date published: 2019-01-29
Does this gauge have outputs for a shift light ?Thank you for your question. 5897 does not have outputs for a shift light, this is typical with our in-dash tachometers. If you wanted to pair a shift light with an in-dash tachometer, you can use a stand-alone shift light such as #5343.Date published: 2018-09-21
Hi. I have a 69firebird with an LT1 engine. And there is Phantom tachometer. But it allways stays on 1000rpm. Even when it is disconected. What is wrong here? Are there any modul betwen the tach and the engine ecu?Hi Geir, thank you so much for contacting us. We're happy to help, but need to ask a few questions about your application to get everything up and running. Could we ask you to please email us here: https://www.autometer.com/resources/index/ask_a_question You can also hit the Chat Link on the top of every page on our site to reach us during business hours (8-5 CST). Hope this helps!Date published: 2018-06-25
Any idea if this tachometer can be hooked up to a V-10 motor out of a dodge viper? If it can, what all additional accessories should I purchase to make it work?Thank you so much for contacting us. It really depends on which Viper engine you'll be working with. Some would require the use of a 9117 tach adapter (https://www.autometer.com/tach-adapter.html) while some would require the tach to be sent into our shop to have a custom cylinder calibration programmed into the tach. For specifics on your vehicle, I'd recommend reaching out directly to our tech team at 866.248.6357, via the Chat Link on every page on the site via email here: https://www.autometer.com/resources/index/ask_a_question Hope this helps!Date published: 2018-06-05
Will this tach work on 2001 5.3 ls motorHi there, thank you for connecting with us. Yes, this tachometer is compatible with a 2001 5.3 liter. Although, It's possible that a 9117 Tach Adapter may be required. We would recommend contacting us with the year and model of the application and we can provide some additional details. Give us a ring at 866.248.6356, hit the Chat link at the top of the page or you can email us here: http://www.autometer.com/resources/index/ask_a_questionDate published: 2018-02-05
on the back side of a phantom auto meter gauge, what does the SIG stand for.Hi Jerry, thank you so much for contacting us. SIG stands for signal. That's where the input for the gauge is connected. Hope this helps!Date published: 2018-01-30
California Prop 65 Warning