2-1/16" WATER TEMPERATURE, 100-250 °F, AIR-CORE, ULTRA-LITE
Shipping in 5 business days
Free Shipping over $99
Hassle Free Returns
- Size:2-1/16" (52.4mm)
- Range:100-250 °F
- Instructions: Download PDF
A high water temp can be detrimental to an engine. Heat is the enemy of performance and reliability. Keep tabs on your temps with the most trusted water temperature gauge on the market. AutoMeter’s advanced 1/8” NPT temperature transducer is included for a simple installation on any application.
- Traditional incandescent lighting illuminates around the perimeter of the dial
- 12 and 16 volt compatible, well-suited with nearly every street car or race car electrical system
- Gauge kit includes 1/8” NPT temperature sender, 3/8” and 1/2" NPT adapters, bulb and socket assembly, red and green bulb covers, mounting hardware, and detailed instructions for installation
- AutoMeter’s race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle
- 3/8" NPT and 1/2" NPT adapter fittings
What is the minimum size hole to fit the gauges through? I have 2" holes in my dash, will the gauges fit or do i have to make the hole 1/16" larger
Hi Steve, not necessarily. Depending on the tolerance, you may get a tight or snug fit into a 2" hole. You may also only need to sand the hole out slightly.
Date published: 2022-01-19
About how long are the 12V, light, and ground wires on Ultra-Lite 4327 (oil), 4391 (volts), 4337 (water) and 4475 (tach)? I'm trying to locate a terminal block before receiving gauges. Thanks.
On the smaller gauges the included sockets have 7 inches of wire for both the 12V and ground. The 4475 tachometer will include 1/4 inch spade terminals only, but no actual wire. You will need to provide the wire and female spade connections for the tachometer. We recommend 18 or 20 gauge. Complete harnesses like our 2198 will also include the wires and connectors.
Date published: 2022-01-16
Is 2 1/16 the total outside width dimension or is the outside ring larger?
Hello phil22, thank you for your question. You can find all the dimensions for our gauges at: https://www.autometer.com/pub/media/manual/dimensions2014.pdf.
Date published: 2021-07-29
Hello Regarding the Ultra-lite series, what is the difference between the "super bezel" and "monster bezel" option? I don’t see any difference in the pictures. Thank you jeanluc
Thank you for your question. There is a difference on the bezel. Please call our tech line and one of our associates will be able to assist you on the difference between the two.
Date published: 2021-02-02
My gauge is reading like 240 degrees, temp gun readings are no higher than 193 degrees max anywhere. The gauge that I have is the pro comp ultra lite. possible bad sending unit or the wrong one? max temp on the gauge face is 250. Thank you.
Hello! Here is a guide that will help answer your question: https://www.autometer.com/blog/faq-post/water-temp-gauge-reads-high/
Date published: 2020-11-25
what is the sending unit part no. for a 4337 water temp gauge?
Hello The sender included with the 4337 is model 2258, which you can see here: https://www.autometer.com/short-sweep-electric-temp-gauge-sender-250-300-and-340-deg.html
Date published: 2020-11-18
Hi. Are these prices $US or $AUS ????? IF $US Can you tell me the price in $AUS Cheers. Kym
These are in USD. For pricing on this gauge we recommend getting in contact with a local distributor in Australia as they will have you avoid import and shipping fees.
Date published: 2020-06-16
What is the depth of the gage from the back of the trim ring(bezel) to the end of the mounting rods?
You can see all the dimensions of this gauge in the following link. https://www.autometer.com/media/dimensions2014.pdf
Date published: 2020-06-06
Hi, what size LED glove replaces the standard globe? Thank you
Thank you for your question. You can purchase any of our LED T3 wedge style bulbs and they will replacement the incandescent bulb that originally came with the gauge.
Date published: 2019-12-18
Does your gauges are they a lite grey color backface
Thank you for your question. Yes, the Ultra-Lite gauges have a silver dial face.
Date published: 2019-05-10
We are considering purchasing tachometer / speedometer / oil temperature / Oil Pressure / water temperature / fuel gauge in the Pro-comp series. Is it a display unit, is there a setting of Km / h ° C Kg / cm2orBar?
Thank you for your question. We do have a variety of metric gauges available, including the 4337-M. You can go on our site and search "Metric" in the search bar and that will filter all the metric gauges we offer.
Date published: 2019-02-26
At what temperature (F* )do i kno the vehicle is overheating
Thank you for reaching out to us. Unfortunately, there is no way for us to know this since every vehicle and situation is different. Most vehicles generally run around 180-190 degrees, but that will vary based on many factors. Ultimately, you want to establish a baseline temperature and monitor from there.
Date published: 2020-02-15
does this gauge have spade connectors on the back or does it have eyelets? i bought the gauge harness kit but my current gauge uses eyelets?
Thank you for connecting with us. All AutoMeter short sweep electric gauges feature 1/4" spade terminals on the back. They are compatible with our 2198 harness as well as our 3298 connector. Many years ago the same model gauges didn't have the spade terminals, only the studs from the meter movement. If you have older gauges we would recommend reaching out to our Service Team at 866-248-6356 or email via this link: https://www.autometer.com/contacts
Date published: 2018-10-17
Do you have a video for the installation of the Ultra-Lite Water temp gage? Can it be put in the dash where the old one comes out?
Hi Jimbo, thank you for reaching out to us. Our gauges are not vehicle specific or designed as a direct OEM replacement. The 4337 mounts into a 2-1/16" diameter hole and can also be mounted in one of our various universal mounting solutions such as a mounting cup or panel.
Date published: 2018-10-01
does gauge come with matching sending unite
Hi Sonny, thank you for reaching out to us. Yes, the 4337 Water Temperature includes the required 1/8" NPT Sender (model 2258), along with a 3/8" NPT and 1/2" NPT adapter.
Date published: 2020-08-18
Sender unit no for water temperature gauge no 4337
Hi Jim, thank you for reaching out to us. The sender included with the 4337 is model 2258, which you can see here: https://www.autometer.com/short-sweep-electric-temp-gauge-sender-250-300-and-340-deg.html
Date published: 2018-12-06
THIS IS AN ELECTRICAL GAUGE NOT MECH? DOES IT COME WITH EVERYTHING NEEDED OR DO I HAVE TO BY FITTINGS.
Thank you so much for the question. This is an electric gauge and will require 18-20 gauge wiring. It will come with an 1/8" NPT sender, 3/8" NPT adapter, and 1/2" adapter. Depending on your application, it's possible that you may require optional methods or adapters for installation. I would recommend reaching out to our service team at 866.248.6356, hitting the Chat link at the top of the page or emailing us and we will try to help you determine the best method for installation. Here is a link to email us: http://www.autometer.com/resources/index/ask_a_question
Date published: 2018-02-27
Hello, I am interested in this guage but I need to know the outside diameter of the bezel.
Thank you for the question. The outside bezel diameter on the 2-1/16" gauges is 2-3/16".
Date published: 2018-01-15
You may also like:
FITTING, ADAPTER, METRIC, M12X1.5 MALE TO 1/8" NPTF FEMALE, BRASS Product #2277$16.94
SSE Gauge Connector, 2 Pack Product #3298$19.30
FITTING, ADAPTER, HEATER HOSE, 5/8", 1/8" NPTF FEMALE, BRASS Product #2280$44.13
FITTING, ADAPTER, HEATER HOSE, 3/4", 1/8" NPTF FEMALE, BRASS Product #2281$50.49
FITTING, ADAPTER, RADIATOR HOSE, 1" TO 1.25", 3/8" NPTF FEMALE, ALUMINUM Product #2282$60.09
FITTING, ADAPTER, RADIATOR HOSE, 1.5", 3/8" NPTF FEMALE, ALUMINUM Product #2283$61.21