You have no items in your shopping cart.
Since 1957, AutoMeter has set the standard in performance, accuracy and durability with their legendary Tachometers. The absolute pinnacle of engineering and technology, it’s no wonder AutoMeter can lay claim to more motorsports victories than every other gauge manufacturer combined. The patented air core meter movement, wound in house to exacting standards, can move the needle from 0 - 5,000 rpm in 333 milliseconds. An inaugural inductee to the Hot Rod Speed Parts Hall of Fame, no other tachometer on the market has had anything approaching its impact on professional racing. Built for a lifetime of service under the harshest conditions, this is the no compromise tach for no compromise builds. When you’re ready for the best, there isn’t another choice.
- ADDITIONAL NOTES
- Traditional incandescent lighting illuminates around the perimeter of the dial
- Compatible with most 4, 6, and 8 cylinder engines (2 - 4 pulse per revolution ignition signals) with points, electronic, and most 12V high-performance racing ignitions.
- 12 and 16 volt compatible, well-suited with nearly every street car or race car electrical system
- Gauge kit includes bulb and socket assembly, red and green bulb covers, mounting hardware, and detailed instructions for installation
- AutoMeter’s race proven air-core electric tachometers provide quick and accurate readings with a needle so responsive it can go from 0 - full scale in 333 milliseconds
- SHIPPED WITH
Bulb & Socket
- Red 3214 & Green 3215
Will this work on a 97 5.9 Cummins Thank you for your question. Unfortunately this will not work without using P/N: 9112 which is our diesel tach adapter.Date published: 2019-12-09
can you post the installation / wiring instructions?Hi Rich, thank you so much for the question. Here is a direct link to the instructions. https://www.autometer.com/media/manual/2650-972X.pdf If you have questions on a specific vehicle I would recommend reaching out to our service team at 866.248.6356, hitting the Chat link at the top of the page or emailing us here: http://www.autometer.com/resources/index/ask_a_questionDate published: 2018-02-19
Can you use this tack with a diesel using the alternator adaptor? Hi Drew, thank you so much for contacting us. Our 9112 Diesel Tach Adapter will absolutely work with this tach. Here's a direct link: https://www.autometer.com/diesel-tach-adapter.html Hope this helps!Date published: 2018-10-10
The stock bulb is too dim. Do you have an led option?Hi Tom, thank you so much for contacting us. We offer a super bright white LED bulb that is a direct fit for the edge base socket in this tach. Here is a link: https://www.autometer.com/led-replacement-bulb-white.html Hope this helps!Date published: 2018-01-30
Can you provide dimensions for tach 2697 and the mounting piece so I can bore a hole and make sure I have clearance behind the tach?Thank you so much for contacting us. Take a look at figure B1 on this pdf for the exact dimensions of the tach: https://www.autometer.com/media/dimensions2014.pdf Hope this helps!Date published: 2018-01-15
https://www.autometer.com/2-tach-5-000-rpm-in-dash-z-series.html I may need to mount the tach upside down in order to see the needle. Is that a problem?Thank you so much for contacting us. I can't foresee any issues related to mounting the this tach upside down. It should function the same way irrespective of the orientation. Hope this helps!Date published: 2018-01-30
California Prop 65 Warning