2-1/16" OIL PRESSURE, 0-100 PSI, AIR-CORE, ULTRA-LITE
Quite possibly the most critical vital to monitor, engine oil pressure can mean the difference between making it home and needing to replace the engine. The patented air core meter movement provides the durability and accuracy that you expect from the AutoMeter name. Throughout 57 years of building the world’s best competition instruments, this meter movement has been the engine powering the machine that sets the benchmark. A single wire, 1/8” NPT oil pressure sender is included.
- Size:2-1/16" (52.4mm)
- Range:0-100 PSI
- Instructions: Download PDF
- Traditional incandescent lighting illuminates around the perimeter of the dial
- 12 and 16 volt compatible, well-suited with nearly every street car or race car electrical system
- Gauge kit includes 1/8” NPT pressure sender, 1/4” NPT adapter, bulb and socket assembly, red and green bulb covers, mounting hardware, and detailed instructions for installation
- AutoMeter’s race proven air-core electric instruments provide quick and accurate readings while keeping hazardous fluids outside of the vehicle
- 3/8" NPT and 1/2" NPT adapter fittings
I'm looking at installing 3 gauges (4327, 4337, and 4970) and each calls for a 3A fuse on the power. I'd rather not have to pull three separate power wires from the fuse box to each gauge, can I wire these in series/parallel from a single 3A (9A?) fuse?
Have a 4327oilpressuregauge.installed and gauge goes to 100psi when ign is turned on and needle then stays there once engine starts.Needlegoes to 0when sender signal wire is disconnected.have bench tested with comp air at60ps1needle deflects past100ps1??
Trying to use an existing dash and need to know on this and all auto meter gauges when it's sized at 2 1/16" is the size from outside edge to outside edge of bezel or the size of the mounting hole? Thanks
You may also like:
FITTING, ADAPTER, METRIC, M16X1.5 MALE TO 1/8" NPTF FEMALE, BRASS Product #2268$15.05
FITTING, ADAPTER, METRIC, 1/8" BSPT MALE TO 1/8" NPTF FEMALE, BRASS Product #2269$14.95
FITTING, ADAPTER, METRIC, M10X1 MALE TO 1/8" NPTF FEMALE, BRASS Product #2265$14.95
FITTING, ADAPTER, METRIC, M12X1 MALE TO 1/8" NPTF FEMALE, BRASS Product #2266$15.05
FITTING, ADAPTER, METRIC, M14X1.5 MALE TO 1/8" NPTF FEMALE, BRASS Product #2267$16.09
LINE, BRAIDED STAINLESS STEEL, #4 DIA., 3FT. LENGTH, -4AN AND 1/8" NPTF FITTINGS Product #3227$61.36