// Free shipping on US Orders over $99* //

GAUGE CONSOLE, OILP/WTMP/VOLT, 2-5/8", 100 PSI/280 °F/16V, BLK DIAL, CHROME BZL, AG

GAUGE CONSOLE, OILP/WTMP/VOLT, 2-5/8", 100 PSI/280 °F/16V, BLK DIAL, CHROME BZL, AG

Product # 2399
$104.95

OR
  • 2-5/8" (66.7mm)
  • Kits
  • 0-100 PSI/10-16V/130-280 °F
  • Incandescent
  • Download
  • Ships in 5 Business Days
  • Free Shipping Over $99*
  • Hassle Free Returns
SHARE
Description
Getting great performance or saving money doesn’t have to be choice. Engineered by AutoMeter in Sycamore, IL, The Auto Gage line of instruments provide the best bang for the buck performance in the industry. For a fast street car or a weekend racer, Auto Gage provides levels of accuracy and durability unheard of in the price category. With countless wins in magazine comparison tests, the best value in gauges comes from exactly the place you’d expect it to. AutoMeter.
ADDITIONAL NOTES

Feature Points

  • Includes bulb and socket assembly with red and green bulb covers
SHIPPED WITH

Adapter/Fitting

  • 1/8" NPT Male to 1/8" compression fitting, 1/8" NPT Female to 1/8" compression fitting, 1/8" NPT to 1/4" NPT bushing, 3/8" NPT and 1/2" NPT adapter fittings.

Tubing

  • 10 ft. nylon tubing - 6 ft. Capillary Tube

Bulb & Socket

  • 2357

Mounting Hardware

  • Bracket Included
Reviews
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 31.09ms
  • REVIEWS, PRODUCT
  • bvseo-msg: HTTP status code of 404 was returned;
Questions

Looking for 3-gauge cluster (water, oil, and generator/battery) for 1963 Falcon Futura 6-cyl. (170).  What do you have that will fit this vehicle and engine?

Asked by: Carl J. Fielstra
Thank you for your question. None of our gauge are made to be vehicle specific and we do not know the specs for your vehicle. Our gauges do not work with factory wiring or sensors and must be used with the provided sensors. You would need to find a way to install the sensor on your vehicle based on your application.
Answered by: Zach from AutoMeter
Date published: 2019-04-18

What are the length and height dimensions? I don't need to how deep but i want to fit this where my stereo was.

Asked by: Jeffery
Thank you for your question. The console is 9-1/8" long, 3" tall, and 1" deep.
Answered by: Zach from AutoMeter
Date published: 2019-03-15

With this Temp gauge, i have a big block Mopar, can i run the temp tube under the intake manifold on top of the lifter valley pan. Will it pick up extra heat and make the gauge read higher than it really is? Or should i run it on top of the intake between

Asked by: Grumpy468
Thank you for reaching out to us. The 2399 temperature gauge features a copper tubing with a metal coiling around it. While it designed to handle engine compartment temperatures, it would always be recommended to be routed away from and not directly touching engine components.
Answered by: Matt from AutoMeter
Date published: 2019-04-09

can I get the water temp gauge in electrical in lieu of mechanical

Asked by: JimG
Hi Jim, thank you for the question. In the AutoGage series we offer only mechanical gauges, except in our mini console model 2391. Throughout the AutoMeter line we offer several 2-5/8" electric water temp gauges. However, nothing sold in a 3 gauge set. We sell the panels separately and you would have to purchase each gauge individually in the AutoMeter line.
Answered by: Matt from AutoMeter
Date published: 2019-01-03

Could I get this exact unit with orange needles? 

Asked by: Drewsky67
Thank you for your question. Unfortunately, these gauges cannot be customized so they are not available with orange needles.
Answered by: Zach from AutoMeter
Date published: 2018-12-19

I purchased a auto gauge # 2399. In the kit there are three rubber grommets. My question is how does the large solid grommet for the temp gauge go around the temp tubing & in the firewall when the grommet is solid?

Asked by: keta
Hi Keta, thank you for the question. The larger rubber grommet must be split or cut and then you can open it up to go around the mechanical temperature tubing.
Answered by: Matt from AutoMeter
Date published: 2018-10-05

On the 2399 gauge set will a Allstar Performance part # ALL 46110-36, braided steel line work on the oil pressure gauge. Does it connect right to the gauge or do I have to buy any fittings or adapters? If so, can you provide part numbers.

Asked by: keta
Hello Mike, thank you for your question. 2399 oil pressure gauge has a 1/8" NPT connector. If your braided steel line connects to a 1/8" fitting, yes you can use it. It looks like the line you mention will connect, however, you should double check to be sure.
Answered by: Zach from AutoMeter
Date published: 2018-09-12

Do either the 2-5/8" or 2-1/16" gauges come in a 4 or 5 gauge under dash console?

Asked by: Guitarman 387
Thank you for the question. There are no 4 or 5 gauge panels for simple under dash mount. Only single, dual, and triple. We do offer 2 x dual panels separately which you can add gauges to if you'd like to run 4. The 2 gauge panels are 2237 (2-1/16") or 3232 (2-5/8").
Answered by: Matt from AutoMeter
Date published: 2018-08-28
  • y_2019, m_4, d_21, h_23CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_16
  • loc_en_US, sid_2399, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_autometer-us
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 65ms
  • QUESTIONS, PRODUCT

California Prop 65 Warning