You have no items in your shopping cart.
SENSOR, OIL PRESSURE, 0-100 PSI, 1/8" NPT MALE, FOR SHORT SWEEP ELEC.
- ADDITIONAL NOTES
- Sensor Body Materlal - Plated steel
- Thread size - 1/8 in. NPTF
- Includes 1/4 in. NPT adapter bushing.
- Measures 3.25 in. long from end of threads to tip of sensor stud and 2 in. in diameter.
- Not compatible with fuel.
- SHIPPED WITH
SENSOR, OIL PRESSURE, 0-100 PSI, 1/8" NPT MALE, FOR SHORT SWEEP ELEC. is rated out of 5 by 3.Rated 5 out of 5 by Jason from Great parts Easy install, everything works! Happy I replaced the old ones due to false readings.Date published: 2018-01-02Rated 5 out of 5 by ARR1950 from 0 TO 100 POUNDS PRESSURE TRANSDUCER I HAVE USED AUTO METER FOR ALMOST 19 YEARS AND LIKE THEIR PRODUCTS. THERE SHOULD BE A NOTE ON INSTALLATION THT THE SENDING UNIT NEEDS TO BE INSTALLED WITH ELECTRICAL CONNECTION UP SO FLUID CONNECTION IS DOWN. THE HOUSING SEAL TO THE UNIT IS NOT LIQUID TIGHT. SINCE MINE IS UPSIDE DOWN I SEALED THE JOINT WITH A SEALANT SO HOPEFULLY IT WILL NOT ALLOW FLUIDS TO ENTER THE MODULE.Date published: 2018-01-21Rated 1 out of 5 by Chris C from Have had 2 that have failed My first one worked great for about 4 years. Then it started pegging out over 100psi when running. Key on engine off reads over 60psi. I replaced the sender spring 2019. It worked normally for about a month. Now doing the same, reading way higher than normal even with key on engine off. With key off gauge reads 0. Disconnect sender, key on gauge reads 0. Guess I'll have to order another...Date published: 2019-07-23
California Prop 65 Warning